Product data sheet SR2PACK2BD Characteristics compact smart relay Zelio Logic - discovery pack - 20 I O - 24 V DC Main Range of product Zelio Logic Product or component Compact discovery packs type Discrete input number 12 conforming to EN/IEC 61131-2 type 1 Number of outputs 8 relay output(s) Complementary Kit composition Cable PC SR2USB01 for connection to PC SR2B201BD Zelio Soft 2 programming software CD-ROM Input/Output number 20 Local display With Number or control scheme lines 120 with ladder programming <= 200 with FBD programming Cycle time 6...90 ms Backup time 10 years at 25 C Clock drift 6 s/month at 25 C 12 min/year at 0...55 C Checks Program memory on each power up Us rated supply voltage 24 V Supply voltage limits 19.2...30 V Supply current 100 mA (without extension) Power dissipation in W 6 W without extension Reverse polarity protection With Discrete input type Resistive Discrete input voltage 24 V DC Discrete input current 4 mA Counting frequency 1 kHz for discrete input Voltage state1 guaranteed >= 15 V for IB...IG used as discrete input circuit >= 15 V for I1...IA and IH...IR discrete input circuit Voltage state 0 guaranteed <= 5 V for IB...IG used as discrete input circuit <= 5 V for I1...IA and IH...IR discrete input circuit Current state 1 guaranteed >= 2.2 mA for I1...IA and IH...IR discrete input circuit >= 1.2 mA for IB...IG used as discrete input circuit Current state 0 guaranteed < 0.5 mA for IB...IG used as discrete input circuit Input compatibility 3-wire proximity sensors PNP (discrete input) Analogue input number 2 Analogue input type Common mode Analogue input range 0...10 V 0...24 V Maximum permissible voltage 30 V (analogue input circuit) Analogue input resolution 8 bits LSB value 39 mV (analogue input circuit) Conversion time Smart relay cycle time for analogue input circuit Sep 27, 2013 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Conversion error +/- 6.2 % at 55 C for analogue input circuit +/- 5 % at 25 C for analogue input circuit Repeat accuracy +/- 2 % at 55 C for analogue input circuit Operating distance 10 m between stations, with screened cable (sensor not isolated) for analogue in- put circuit Input impedance 7.4 kOhm (I1...IA and IH...IR discrete input circuit) 12 kOhm (IB...IG used as discrete input circuit) 12 kOhm (IB...IG used as analogue input circuit) Output voltage limits 5...30 V DC (relay output) 24...250 V AC (relay output) Contacts type and composition NO for relay output Output thermal current 8 A for all 8 outputs (relay output) Electrical durability 500000 cycles DC-13 at 24 V, 0.6 A for relay output conforming to EN/IEC 60947-5-1 500000 cycles DC-12 at 24 V, 1.5 A for relay output conforming to EN/IEC 60947-5-1 500000 cycles AC-15 at 230 V, 0.9 A for relay output conforming to EN/IEC 60947-5-1 500000 cycles AC-12 at 230 V, 1.5 A for relay output conforming to EN/IEC 60947-5-1 Switching capacity in mA >= 10 mA at 12 V (relay output) Operating rate in Hz 10 Hz (no load) for relay output 0.1 Hz (at Ie) for relay output Mechanical durability 10000000 cycles (relay output) Uimp rated impulse withstand voltage 4 kV conforming to EN/IEC 60947-1 and EN/IEC 60664-1 Clock Without Response time 5 ms (from state 1 to state 0) for relay output 10 ms (from state 0 to state 1) for relay output Connections - terminals Screw terminals, clamping capacity: 2 x 0.25...2 x 0.75 mm AWG 24...18 flexible with cable end Screw terminals, clamping capacity: 2 x 0.2...2 x 1.5 mm AWG 24...16 solid Screw terminals, clamping capacity: 1 x 0.25...1 x 2.5 mm AWG 24...14 flexible with cable end Screw terminals, clamping capacity: 1 x 0.2...1 x 2.5 mm AWG 25...14 solid Screw terminals, clamping capacity: 1 x 0.2...1 x 2.5 mm AWG 25...14 semi-solid Tightening torque 0.5 N.m Overvoltage category III conforming to EN/IEC 60664-1 Product weight 0.7 kg Environment Immunity to microbreaks <= 1 ms Product certifications CSA C-Tick GL GOST UL Standards EN/IEC 60068-2-27 Ea EN/IEC 60068-2-6 Fc EN/IEC 61000-4-11 EN/IEC 61000-4-12 EN/IEC 61000-4-2 level 3 EN/IEC 61000-4-3 EN/IEC 61000-4-4 level 3 EN/IEC 61000-4-5 EN/IEC 61000-4-6 level 3 IP degree of protection IP40 (front panel) conforming to IEC 60529 IP20 (terminal block) conforming to IEC 60529 Environmental characteristic Low voltage directive conforming to EN/IEC 61131-2 EMC directive conforming to EN/IEC 61131-2 zone B EMC directive conforming to EN/IEC 61000-6-4 EMC directive conforming to EN/IEC 61000-6-3 EMC directive conforming to EN/IEC 61000-6-2 Disturbance radiated/conducted Class B conforming to EN 55022-11 group 1 Pollution degree 2 conforming to EN/IEC 61131-2 Ambient air temperature for operation -20...55 C conforming to IEC 60068-2-1 and IEC 60068-2-2 -20...40 C in non-ventilated enclosure conforming to IEC 60068-2-1 and IEC 60068-2-2 Ambient air temperature for storage -40...70 C 2