Product data sheet SSP1A4125BDS Characteristics Harmony, Solid state relay, 125 A, panel mount, zero voltage switching, thermal pad and smart diagnostic, input 4...32 V DC, output 48660 V AC Main Range of product Harmony Solid State Relays Product or Component Solid state relay up to 125 A Type Provided accessory Thermal pad Device short name SSP1 Mounting Support Panel Number of phases 1 phase Line Rated Current 125A Solid state output type SCR output Zero voltage switching Output switching mode Zero voltage switching Complementary Uc control circuit voltage 4...32 V DC Minimum switching voltage 4V DC turn-on Maximum switching voltage 1V DC turn-off Response time 0.5 cycle (turn-on) 0.5 cycle (turn-off) Input current 712mA Output voltage 48...660 V AC Load current 0.15125A Transient overvoltage 1200 V Surge current 1750A 16.6 ms Maximum It for fusing 12709A.S for 8.33 ms at 60 Hz 13950A.s for 10 ms at 50 Hz Co-ordination type Type 1 - 80A miniature circuit breaker (MCB) B Type 2 - 63A miniature circuit breaker (MCB) B Maximum leakage current 1mA off-state Maximum voltage drop <1.15V on-state DV/dt 500 V/s off-state at maximum voltage Power factor 0.5 (with maximum load) Motor controller rating 2Hp 120 V AC 5Hp 240 V AC 10hp 480 V AC Insulation resistance 1000 MOhm at 500V DC Maximum capacitance 8pF for input/output Dielectric strength 4KV AC for input/output 4kV AC for input or output to case Uimp rated impulse withstand voltage 6KV output to case 6kV input to output Tightening torque 1.5...1.7 N.m for input 2...2.2 N.m for output 17.7...19.47 lb.in for output 13.27...15.04 lb.in for input 0.5...0.6 N.m for auxillary terminal 4.4...5.3 lb.in for auxillary terminal Oct 10, 2021 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Connections - terminals Screw terminals 0.2...3.3 mm, AWG 24...AWG 12) with cable end input Screw terminals 0.5...5.26 mm, AWG 20...AWG 10) with cable end output Screw terminals 0.2...3.3 mm, AWG 24...AWG 12) without cable end input Screw terminals 0.5...8.26 mm, AWG 20...AWG 8) without cable end output Forked type tag connectors 9.2 x 4 mm input Ring lugs 9.2 x 4 mm input Forked type tag connectors 11.7 x 4.5 mm output Ring lugs 11.7 x 4.5 mm output Auxiliary/Alarm connection terminal Screw-type connector, 0.5...1.5 mm AWG 20...AWG 16)slotted Philips Thermal resistance 0.22 C/W junction to case LED indicator LED, steady, green ON status control input/test button actuated LED, steady, amber ON status load LED, flashing, amber control input to energise load LED, steady, red open-circuit control input LED, flashing, red load cut-off/short-circuit Maximum alarm output current 30mA 32 V DC Minimum load current 150mA IP degree of protection IP20 Electromagnetic compatibility Electrostatic discharge 6 kV criteria A contact discharge conforming to IEC 61000-4-2 Electrostatic discharge 8 kV criteria A air discharge conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test criteria A output ports conforming to IEC 61000-4-3 Radiated radio-frequency electromagnetic field immunity test criteria B alarm port conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test 1 kV, 5/100 kHz criteria B output ports conforming to IEC 61000-4-4 Surge immunity test 1 kV criteria A output ports line to line conforming to IEC 61000-4-5 Surge immunity test 2 kV criteria A output ports line to earth conforming to IEC 61000-4-5 Safety reliability data MTTFd = 1875.9 years B10d = 1731395 Product Weight 3.43oz (97.1g) Device presentation Complete product Environment Ambient Air Temperature for Operation -40176F (-4080C) Ambient Air Temperature for Storage -40257F (-40125C) Pollution degree 2 Overvoltage category III Product Certifications CE EAC UL CSA Marking CE EAC CSA UL Standards CSA C22.2 No 14-13 EN/IEC 62314 UL 508 EN/IEC 60950-1 Ordering and shipping details Category 22375 - INTERFACE MODULE(ABA,R,S) Discount Schedule CP2 GTIN 3606485442273 Nbr. of units in pkg. 1 Package weight(Lbs) 4.02oz (114g) Returnability Yes 2