SSP1A475BDT Schneider

Product data sheet SSP1A475BDT Characteristics solid state relay-panel mount-thermal pad-input 4-32V DC, output 48-660V AC,75 A Main Range of product Zelio Relay Product or component type Solid state relay Provided equipment Thermal pad Device short name SSP1 Mounting support Panel Network number of phases 1 phase Contacts type and composition 1 NO In rated current 75 A Solid state output type Zero voltage switching SCR output Complementary Uc control circuit voltage 4...32 V DC Minimum switching voltage 4 V DC turn-on Maximum switching voltage 1 V DC turn-off Response time 0.5 cycle turn-on 0.5 cycle turn-off Input current limits 7...12 mA Output voltage 48...660 V AC Load current 0.15...75 A Absolute maximum voltage 1200 V Surge current <= 1000 A for 16.6 ms Maximum It for fusing 4150 A.s for 8.33 ms at 60 Hz half cycle 4555 A.s for 10 ms at 50 Hz half cycle Protection device type Type 1 - 50 A miniature circuit breaker (MCB) - curve B Type 2 - 40 A miniature circuit breaker (MCB) - curve B Leakage current <= 1 mA off-state Voltage drop 1.15 V on-state Dec 21, 2018 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applicationsDV/Dt 500 V/s off-state at maximum voltage Cos phi 0.5 with maximum load Motor power hp 1.5 hp 120 V AC 3 hp 240 V AC 7.5 hp 480 V AC Insulation resistance 1000 MOhm at 500 V DC Capacitance unbalance 8 pF for input/output Dielectric strength 4 kV AC for input/output 4 kV AC for input or output to case Uimp rated impulse withstand voltage 6 kV output to case 6 kV input to output Tightening torque 1.5...1.7 N.m for input 2...2.2 N.m for output Connections - terminals Forked type tag connectors : 9.2 x 4 mm for input Ring lugs : 9.2 x 4 mm for input Forked type tag connectors : 11.7 x 4.5 mm for output Ring lugs : 11.7 x 4.5 mm for output Screw terminals : 0.2...3.3 mm, (AWG 24...AWG 12) with cable end for input Screw terminals : 0.5...5.26 mm, (AWG 20...AWG 10) with cable end for output Screw terminals : 0.2...3.3 mm, (AWG 24...AWG 12) without cable end for input Screw terminals : 0.5...8.26 mm, (AWG 20...AWG 8) without cable end for output Thermal resitance 0.3 C/W junction to case Thermal impedance 0.48 C-in/W at 25 psi Local signalling LED, green for input IP degree of protection IP20 Safety reliability data MTTFd = 1875.9 years B10d = 1731395 Product weight 89.2 g Environment Ambient air temperature for operation -40...80 C Ambient air temperature for storage -40...125 C Pollution degree 2 Overvoltage category III Product certifications CE CSA RoHS UL REACH EAC Marking CE CSA UL EAC Standards EN/IEC 60950-1 UL 508 EN/IEC 62314 CSA C22.2 No 14-13 Offer Sustainability Sustainable offer status Green Premium product RoHS (date code: YYWW) Compliant - since 1522 - Schneider Electric declaration of conformity Schneider Electric declaration of conformity REACh Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold Product environmental profile Available Product Environmental Profile Product end of life instructions Available End of Life Information 2