W171DIP-4 Schneider

117SIP, 107DIP, 171DIP PCB Mount Miniature Reed Relays/SPDT and SPST 0.5 Amp Rated Miniature Reed Relays Requires Only 0.5 Inch Spacing from Adjacent Relays RoHS Compliant Pins are 0.20 Inch 117SIP on Center for Simple Routing on PCB Can Sustain Lead-Free Re-flow for Pin-Thru-Paste Assembly General Specifications Contact Characteristics Units 117SIP Number and type of Contacts SPST Contact materials Rhodium Current rating A 0.5 Switching voltage ~ V 120 V 200 Minimum Switching Requirement Minimum mA 10 Coil Characteristics Voltage Range V 5.24 Operating Range % of Nominal 80% to 110% Average consumption W 0.29 Drop-out voltage threshold 10% Performance Characteristics Electrical Life Operations Rated Current (Resistive) 50,000,000 Mechanical Life Unpowered 100,000,000 Operating time (response time) ms 0.45 ~ Rated insulation voltage Between coil and contact V 500 ~ Dielectric strength Between poles V 500 ~ rms voltage Between contacts V 150 Environment Ambient air temperature Storage C -40+85 around the device Operation C -40+55 Vibration resistance Operational g-n 20, 10-200 Hz Shock resistance g-n 50 Weight grams 1 117SIP 0.76 MAX 0.29 MAX (19.3) (7.27) 0.125 MIN. 0.34 (3.18) (8.55) 13 5 7 0.3 (7.5) 0.01 (0.25) 0.2 0.02 (5) 0.08 (0.51) (1.97) WHEN SPACING SIP AND DIP RELAYS, THE RELAYS REQUIRE 0.6 1/2 INCH SPACING FROM THE (15.2) SIDE OF THE ADJACENT RELAYS Circuit Board Pin Spacing Viewed from component side DRAWING ENLARGED TO 200% OF ACTUAL SIZE 8/8 Magnecraft Solution Guide 105A Magnecraft Solution Guide 105A 0.1 IN GRID (2.54 MM) 1 7 SECTION 8www.magnecraft.com 847-441-2540 117SIP, 107DIP, 171DIP PCB Mount Miniature Reed Relays/SPDT and SPST 0.5 Amp Rated Miniature Reed Relays 107DIP 171DIP 107DIP 171DIP 171DIP SPST-NO DPST-NO SPST Rhodium Rhodium Rhodium 0.5 0.5 0.5 120 120 60 100 100 100 10 10 10 5.24 5.24 5.24 80% to 110% 80% to 110% 80% to 110% 0.29 0.29 0.29 10% 10% 10% 50,000,000 50,000,000 50,000,000 100,000,000 100,000,000 100,000,000 1 1 1 1000 1000 1000 1000 1000 1000 200 200 200 -40+85 -40+85 -40+85 -40+55 -40+55 -40+55 20, 10-200 Hz 20, 10-200 Hz 20, 10-200 Hz 50 50 50 1 1 1 107DIP & 171DIP Circuit Board Pin Spacing 0.79 MAX 0.29 MAX Viewed from component side (20.14) (7.37) 0.03 0.1 IN GRID 14 8 (0.64) 0.3 MAX (2.54 MM) (7.62) 0.4 1 7 0.02 0.12 (10.2) 0.01 0.38 (0.51) (3) (0.25) (9.65) 0.6 (15.24) DRAWING ENLARGED TO 200% OF ACTUAL SIZE 8/9 Magnecraft Solution Guide 105A Magnecraft Solution Guide 105A SECTION 8