W172DIP-21 Schneider

172DIP PCB Mount Miniature Reed Relay/SPDT and DPDT 0.25 Amp Rated Can Sustain Lead-Free Can Sur vive High Shock to Avoid Re-flow for Pin-Thru-Paste Damage in Harsh Conditions Assembly RoHS Compliant Sealed Construction in Standard 0.10 Inch on Center Pin Configuration General Specifications Contact Characteristics Units 172DIP 172DIP Number and type of Contacts SPDT DPDT Contact materials Rhodium Rhodium Current rating A 0.25 0.25 ~ Switching voltage V 60 60 V 100 100 Minimum Switching Requirement Minimum mA 10 10 Coil Characteristics Voltage Range V 5.24 5.24 Operating Range % of Nominal 80% to 110% 80% to 110% Average consumption W 0.29 0.29 Drop-out voltage threshold 10% 10% Performance Characteristics Electrical Life Operations Rated Current (Resistive) 50,000,000 50,000,000 Mechanical Life Unpowered 100,000,000 100,000,000 Operating time (response time) ms 1 1 ~ Rated insulation voltage Between coil and contact V 1000 1000 ~ Dielectric strength Between poles V 1000 1000 rms voltage Between contacts ~ V 200 200 Environment Ambient air temperature Storage C -40+85 -40+85 around the device Operation C -40+55 -40+55 Vibration resistance Operational g-n 20, 10-200 Hz 20, 10-200 Hz Shock resistance g-n 50 50 Weight grams 1 1 172DIP SPDT Circuit Board Pin Spacing 172DIP DPDT 0.79 MAX 0.29 MAX Viewed from component side (20.14) (7.37) 0.8 MAX 0.4 MAX (20.32) (10.2) 0.03 0.1 IN GRID 14 8 (0.64) 0.3 MAX (2.54 MM) (7.62) 0.4 MAX (10.2) 0.4 1 7 0.02 0.12 (10.2) 0.025 0.01 0.38 (0.51) (3) 0.1 (0.64) (0.25) 0.05 (9.65) (2.5) 0.6 (1.2) (15.24) 0.12 0.6 0.08 (3) (15.24) (2.09) WHEN SPACING DIP RELAYS, THE RELAYS 0.3 0.003 REQUIRE 1/2 INCH SPACING FROM THE (7.62) SIDE OF THE ADJACENT RELAYS DRAWINGS AND PIN SPACING ENLARGED TO 200% OF ACTUAL SIZE 8/12 Magnecraft Solution Guide 105A Magnecraft Solution Guide 105A SECTION 8www.magnecraft.com 847-441-2540 Standard Part Numbers BOLD-FACED PART NUMBERS ARE NORMALLY STOCKED Nominal Input Voltage Nominal Coil Resistance () Part Number Contact Configuration Figure 5 VDC 200 W172DIP-1 SPDT A 12 VDC 1000 W172DIP-3 SPDT A 24 VDC 2200 W172DIP-4 SPDT A 5 VDC 200 W172DIP-5 SPDT w/ Clamping Diode B 12 VDC 1000 W172DIP-7 SPDT w/ Clamping Diode B 24 VDC 2200 W172DIP-8 SPDT w/ Clamping Diode B 5 VDC 200 W172DIP-31 SPDT C 12 VDC 1000 W172DIP-33 SPDT C 24 VDC 2200 W172DIP-34 SPDT C 5 VDC 200 W172DIP-35 SPDT w/ Clamping Diode D 12 VDC 1000 W172DIP-37 SPDT w/ Clamping Diode D 24 VDC 2200 W172DIP-38 SPDT w/ Clamping Diode D 5 VDC 200 W172DIP-141 SPDT E 12 VDC 1000 W172DIP-145 SPDT E 24 VDC 3200 W172DIP-146 SPDT E 5 VDC 200 W172DIP-147 SPDT w/ Clamping Diode F 12 VDC 1000 W172DIP-149 SPDT w/ Clamping Diode F 24 VDC 3200 W172DIP-150 SPDT w/ Clamping Diode F 5 VDC 46 W172DIP-17 DPDT G 12 VDC 266 W172DIP-19 DPDT G 24 VDC 1066 W172DIP-20 DPDT G 5 VDC 46 W172DIP-21 DPDT w/ Clamping Diode H 12 VDC 266 W172DIP-23 DPDT w/ Clamping Diode H 24 VDC 1066 W172DIP-24 DPDT w/ Clamping Diode H WIRING DIAGRAMS TOP VIEW 14 13 9 8 14 13 9 8 14 13 9 8 14 13 9 8 CIRCUIT BOARD PIN SPACING Circuit Board Pin Spacing 0.79 MAX 0.29 MAX VIEWED FROM COMPONENT SIDE Viewed from component side (20.14) (7.37) (TOP VIEW) 0.03 1 2 67 1 2(+) (-)6 7 0.1 IN GRID 12(+) (-)67 1 2 67 14 8 (0.64) Figure A Figure B Figure C Figure D 0.3 MAX (2.54 MM) SPDT WITH DIODE SPDT WITHOUT DIODE SPDT WITH DIODE SPDT WITHOUT DIODE (7.62) 14 13 9 8 14 13 9 8 14 13 (-)9 8 14 13 9 8 0.4 1 7 0.02 0.12 (10.2) 0.01 0.38 (0.51) (3) (0.25) (9.65) 0.6 (15.24) 0.1 IN GRID 1 2 6 7 1 2(+) (-)67 1 2 6 7 1 2(+) 6 7 (2.54) MM) Figure E Figure F Figure G Figure H SPDT WITHOUT DIODE SPDT WITH DIODE DPDT WITHOUT DIODE DPDT WITH DIODE 8/13 Magnecraft Solution Guide 105A Magnecraft Solution Guide 105A SECTION 8