XGCS49LB201 Schneider

Product data sheet XGCS49LB201 Characteristics Panel Smart antenna with pilot lights Main Range of product OsiSense XG Product or component Panel mounting smart antenna with lights type RFID compact station XGCS name RFID frequency 13.56 MHz Design Diameter 22 mounting Electrical connection 5 pin(s) 1 male connector M12 Transmission rate 9600 bauds...115200 bauds (automatic detection) Outer dimension 40 x 40 x 40 mm Product compatibility RFID microchip Texas (Tag-it HFI) RFID microchip INSIDE (micropass) RFID microchip STM (CRIX4K) RFID microchip Fujitsu (MB89R118 - MB89R119) RFID microchip NXP (SL2, SL1, Ultralight, Std 1K/4K, Desfire) RFID microchip Microelectronic (EM4135) Sn nominal sensing 10...70 mm distance Us rated supply volt- 24 V DC conforming to Protective Extra Low Voltage age Complementary Communication port protocol Modbus RTU Communication port support RS485 non isolated Associated tag type Automatic detection of the type of tag ISO 14443 standard tags ISO 15693 standard tags Supply voltage limits 19.2...29 V DC Current consumption < 60 mA Status LED 2 LEDs (multi-colour) for multi-colour LED 1 LED (dual colour) for communication network 1 LED (dual colour) for RFID communication Tightening torque < 2.2 N.m Marking CE Product weight 0.057 kg Environment Product certifications UL, FCC Standards ETSI EN 300 330-1 ETSI EN 300 330-2 ETSI EN 301 489-3 ETSI EN 301 489-1 Ambient air temperature for operation -25...70 C Ambient air temperature for storage -40...85 C IP degree of protection IP69K (front face) conforming to IEC 60529 IP65 (back) conforming to IEC 60529 Vibration resistance 2 mm (f = 5...29.5 Hz) conforming to EN 60068-2-6 7 gn (f = 29.5...150 Hz) conforming to EN 60068-2-6 Shock resistance 30 gn for 11 ms conforming to EN 60068-2-27 Nov 9, 2017 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.IK degree of protection IK02 conforming to EN 50102 Electromagnetic compatibility Electrostatic discharge immunity test forcontact discharge ( level: 3) - test level 6 kV conforming to IEC 61000-4-2 Electrostatic discharge immunity test forair discharge ( level: 3) - test level 8 kV conforming to IEC 61000-4-2 Susceptibility to electromagnetic fields ( level: 3) - test level 10 V/m conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test forsignal ports ( level: 3) - test level 1 kV conforming to IEC 61000-4-4 Electrical fast transient/burst immunity test forpower ports ( level: 3) - test level 2 kV conforming to IEC 61000-4-4 1.2/50 s shock waves immunity test ( level: 3) - test level 10 kV conforming to IEC 61000-4-5 Conducted RF disturbances ( level: 3) - test level 10 V conforming to IEC 61000-4-6 Magnetic field at power frequency ( level: 4) - test level 30 A/m conforming to IEC 61000-4-8 2