XMLA070D2S11 Schneider

Product datasheet xmla070d2s11 Characteristics Main Range of product OsiSense XM Product or component type Electromechanical pressure sensor Pressure sensor type Electromechanical pressure sensor Device short name XMLA Pressure sensor size 1015.26 psi (70 bar) Controlled fluid Hydraulic oil (32...320 F (0...160 C)) Fluid connection type G 1/4 (female) conforming to ISO 228 Electrical connection Screw-clamps terminals 1 x 0.5...2 x 2.5 mm 1 connector Pg 13 AWG gauge AWG 20...AWG 14 Cable entry Cable gland 9...13 mm Contacts type and composition 1 C/O Product specific application - Pressure switch type of operation Detection of 1 single threshold Electrical circuit type Control circuit Scale type Fixed differential Local display With Adjustable range of switching 72.52...1015.26 psi (5...70 bar) point on rising pressure Adjustable range of switching 29.01...906.49 psi (2...62.5 bar) point on falling pressure Maximum permissible accidental 2320.6 psi (160 bar) pressure Destruction pressure 4641.21 psi (320 bar) Pressure actuator Piston Materials in contact with fluid Brass FPM, FKM PTFE Steel Enclosure material Zinc alloy In rated current 3 A, B300, AC-15 (Ue = 120 V) conforming to EN/IEC 60947-5-1 1.5 A, B300, AC-15 (Ue = 240 V) conforming to EN/IEC 60947-5-1 0.1 A, R300, DC-13 (Ue = 250 V) conforming to EN/IEC 60947-5-1 Complementary Natural differential at low setting 43.51 psi (3 bar) (+/- 1 bar) Natural differential at high setting 108.78 psi (7.5 bar) (+/- 1 bar) Maximum permissible pressure - per cycle 1305.34 psi (90 bar) Terminal block type 4 terminals Operating rate 60 cyc/mn Repeat accuracy < 2 % Ui rated insulation voltage 500 V conforming to EN/IEC 60947-1 300 V conforming to UL 508 300 V conforming to CSA C22.2 No 14 Uimp rated impulse withstand voltage 6 kV conforming to EN/IEC 60947-1 Auxiliary contacts operation Snap action Contacts material Silver contacts Resistance across terminals < 25 mOhm conforming to IEC 255-7 category 3 < 25 mOhm conforming to NF C 93-050 method A Short-circuit protection 10 A cartridge fuse type gG (gl) 1 / 4 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Mechanical durability 6000000 cycles Setting External Height 4.45 in (113 mm) Depth 2.95 in (75 mm) Width 1.38 in (35 mm) Product weight 1.53 lb(US) (0.695 kg) Environment standards CE EN/IEC 60947-5-1 UL 508 CSA C22.2 No 14 product certifications BV CCC CSA LROS (Lloyds register of shipping) UL EAC protective treatment TC (standard version) ambient air temperature for operation -13...158 F (-25...70 C) ambient air temperature for storage -40...158 F (-40...70 C) operating position Any position vibration resistance 4 gn (f = 30...500 Hz) conforming to IEC 60068-2-6 shock resistance 50 gn conforming to IEC 60068-2-27 electrical shock protection class Class I conforming to IEC 1140 Class I conforming to IEC 536 Class I conforming to NF C 20-030 IP degree of protection IP66 conforming to EN/IEC 60529 Offer Sustainability Not Green Premium product Not Green Premium product Compliant - since 0902 - Schneider Electric declaration Compliant - since 0902 - Schneider Electric declaration of conformity of conformity Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold Need no specific recycling operations Need no specific recycling operations WARNING: This product can expose you to chemicals WARNING: This product can expose you to chemicals including: including: Diisononyl phthalate (DINP), which is known to the State Diisononyl phthalate (DINP), which is known to the State of California to cause of California to cause cancer, and cancer, and Di-isodecyl phthalate (DIDP), which is known to the State Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth of California to cause birth defects or other reproductive defects or other reproductive harm. harm. For more information go to www.p65warnings.ca.gov For more information go to www.p65warnings.ca.gov Contractual warranty Warranty period 18 months Dimensions 2 / 4