XX9V1A1C2M12 Schneider

Product data sheet XX9V1A1C2M12 Characteristics ultrasonic sensor parallelepipedic - Sn 0.5 m - 4..20 mA - M12 connector Product availability: Non-Stock - Not normally stocked in distribution facility Main Range of product OsiSense XX Sensor type Ultrasonic sensor Series name General purpose Sensor name XX9 Sensor design Flat form 18 x 33 x 60 + cylindrical M18 Detection system Diffuse Sn nominal sensing 1.64 ft (0.5 m) adjustable with remote teach push- distance button Material Plastic Type of output signal Analogue Wiring technique 4-wire Analogue output func- 4...20 mA tion Us rated supply volt- 12...24 V DC with reverse polarity protection age Electrical connection Male connector M12 4 pins Sd sensing range 0.17...1.67 ft (0.051...0.508 m) Beam angle 6 IP degree of protection IP67 conforming to IEC 60529 Complementary Enclosure material Valox Front material Epoxy Thread type M18 x 1 Supply voltage limits 10...28 V DC Sa assured operating distance 0.17...1.67 ft (0.051...0.508 m) (teach mode) Blind zone 0...2.01 in (0...51 mm) Transmission frequency 300 kHz Repeat accuracy 1.27 % Deviation angle from 90 of object to be detected -7...7 Minimum size of detected object Cylinder diameter 2.5 mm at 0.49 ft (0.15 m) Flat bar 1 mm wide at 0.49 ft (0.15 m) Status LED 1 LED (dual colour) setting-up assistance 1 LED (green) supply on 1 LED (yellow) output state Current consumption 40 mA Maximum switching capacity 10...500 Ohm overload and short-circuit protection Setting-up Slope selection using teach button Delay first up 100 ms Delay response 15 ms Delay recovery 10 ms Marking CE Threaded length 0.79 in (20 mm) Height 2.56 in (65 mm) Width 1.73 in (44 mm) Depth 0.71 in (18 mm) Product weight 0.2 lb(US) (0.09 kg) Aug 10, 2019 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Environment Standards IEC 60947-5-2 Product certifications CCSAus UL Ambient air temperature for operation -4...149 F (-20...65 C) Ambient air temperature for storage -40...176 F (-40...80 C) Vibration resistance +/-1 mm conforming to IEC 60068-2-6 10...55 Hz Shock resistance 30 gn in all 3 axes 11 ms conforming to IEC 60068-2-27 Resistance to electrostatic discharge 8 kV level 4 conforming to IEC 61000-4-2 Resistance to electromagnetic fields 9.14 V/yd (10 V/m) level 3 conforming to IEC 61000-4-3 Resistance to fast transients 1 kV level 3 conforming to IEC 61000-4-4 Ordering and shipping details Category 22490 - SENSORS-ULTRASONIC (XX5,6) Discount Schedule DS2 GTIN 003389119129855 Nbr. of units in pkg. 1 Package weight(Lbs) 0.13 Returnability N Country of origin US Offer Sustainability RoHS (date code: YYWW) Compliant - since 1140 - Schneider Electric declaration of conformity Schnei- der Electric declaration of conformity REACh Reference contains SVHC above the threshold - Go to CaP for more details- Go to CaP for more details Product end of life instructions Available California proposition 65 WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1 Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and - - - - - - - Substance 2 Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. - - - - - - - More information For more information go to www.p65warnings.ca.gov Contractual warranty Warranty period 18 months 2