Product data sheet XXS18S1AM12 Characteristics Ultrasonic sensors XX, ultrasonic sensor cylindrical M18, Sn=1 m, analog 4 20 mA, SYNC, connector M12 Main Range of product Telemecanique Ultrasonic sensors XX Sensor type Ultrasonic sensor Series name General purpose Sensor name XXS Sensor design Cylindrical M18 Detection system Diffuse Sn nominal sensing distance 1M adjustable with remote teach push-button 1M software with kit Material Metal Type of output signal Analogue Wiring technique 5-wire Analogue output function 4...20 mA Us rated supply voltage 12...24 V DC with reverse polarity protection Electrical connection Male connector M12 5 pins Sd sensing range 0.1051M IP degree of protection IP65 conforming to IEC 60529 IP67 Complementary Enclosure material Stainless steel 316L Front material Epoxy Rubber Resin Supply voltage limits 1030V DC Function available With synchronisation mode Software configurable Sa assured operating distance 0.1051M (teach mode) Blind zone 105Mm Transmission frequency 200KHz Repeat accuracy 0.1% Deviation angle from 90 of object to be detected -1010 Minimum size of detected object Cylinder diameter 1 mm at 600mm Status LED Output state: 1 LED (yellow) Echo state: 1 LED (green) Current consumption 30 mA Sep 21, 2021 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Maximum switching capacity 250 Ohm with 12 V DC overload and short-circuit protection 850 Ohm with 24 V DC Setting-up Teach mode Configurator software Maximum delay first up 180Ms Maximum delay recovery 100Ms Marking CE Threaded length 45Mm Height 18Mm Width 18Mm Depth 64Mm Product weight 0.05Kg Environment Standards EN/IEC 60947-5-2 CSA C22.2 No 14 UL 508 Product certifications EAC CULus E2 RCM Ecolab Ambient air temperature for operation -2570C Ambient air temperature for storage -4080C Vibration resistance +/-1 mm conforming to IEC 60068-2-6 (f = 1055Hz) Shock resistance 30 gn in all 3 axes for 11ms conforming to IEC 60068-2-27 Resistance to electrostatic discharge 8KV level 4 conforming to IEC 61000-4-2 Resistance to electromagnetic fields 10V/M level 3 conforming to IEC 61000-4-3 Resistance to fast transients 1KV level 3 conforming to IEC 61000-4-4 Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Weight 49.986G Package 1 Height 4.1Cm Package 1 width 6.4Cm Package 1 Length 9.4Cm Offer Sustainability Sustainable offer status Green Premium product REACh Regulation REACh Declaration EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Decla- ration Mercury free Yes RoHS exemption information Yes Environmental Disclosure Product Environmental Profile California proposition 65 WARNING: This product can expose you to chemicals including: Diisononyl ph- thalate (DINP), which is known to the State of California to cause cancer, and- Di-isodecyl phthalate (DIDP), which is known to the State of California to- cause birth defects or other reproductive harm. For more information go- to www.P65Warnings.ca.gov Product Life Status : Commercialised 2