XZBWR2STT24 Schneider

Product data sheet XZBWR2STT24 Characteristics programmable receiver - 4 PNP - 200 mA - 24 V DC - 2 pusbuttons - 6 LEDs Main Product or component Programmable receiver type Device application Interface to PLC Product compatibility Radio transmitter XZBWE Complementary Function of module Receiver unit for remote sensor Number of transceivers > 0...2 by ZigBee Nominal output current 0.8 A at 24 V DC Output type Transistor PNP Output contacts 4 PNP Time delay range 0.5 s (- 15...15 %) Starting time <= 400 ms Maximum switching current 200 mA DC Minimum switching current 10 mA Us rated supply voltage 24 V DC (- 15...20 %) Voltage drop <= 2 V (nominal output current <= 200 mA) Communication port protocol Zigbee green power at 2.4 GHz Maximum sensing distance 25 m in a metal enclosure 100 m in free field Response time < 30 ms after sensor change Number of channels <= 2 per receiver Utilisation category DC-13 conforming to EN/IEC 60947-5-1 Power consumption in W 26 W DC Breaking capacity 4.8 W per output Short circuit protection 1 A by fast blow fuse Operating position Any position without derating Electrical connection 2 conductors cable 0.14...1.5 mm AWG 26...AWG 16 flexible with cable end con- forming to IEC 60947-1 1 conductor cable 0.14...4 mm AWG 26...AWG 12 flexible with cable end con- forming to IEC 60947-1 2 conductors cable 0.14...1.5 mm AWG 26...AWG 16 solid without cable end conforming to IEC 60947-1 1 conductor cable 0.14...2.5 mm AWG 26...AWG 14 solid without cable end con- forming to IEC 60947-1 Tightening torque 0.5...1 N.m conforming to EN/IEC 60947-1 Housing material Self-extinguishing plastic Status LED Output active: 4 LEDs green Reception signal: 1 LED green and yellow Power ON: 1 LED green Mounting support Mounting plate 35 mm symmetrical DIN rail conforming to EN/IEC 60715 Rated short-duration power frequency withstand 1 kV at 50 Hz conforming to EN/IEC 60947-5-1 voltage Sep 15, 2016 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Uimp rated impulse withstand voltage 0.8 kV Width 36 mm Height 108 mm Depth 75 mm Product weight 0.13 kg Marking CE Environment Surge withstand Common mode: 1 kV conforming to IEC 61000-4-5 Differential mode: 0.5 kV conforming to IEC 61000-4-5 Standards EN/IEC 60947-1 EN/IEC 60947-5-1 Ambient air temperature for storage -40...70 C Relative humidity 90 % without condensation (-20...55 C) conforming to ETSI EN 300 328 Vibration resistance 2 gn (8...150 Hz) conforming to IEC 60068-2-6 +/- 7.5 mm (5...14 Hz) conforming to IEC 60068-2-6 Shock resistance 10 gn with 6000 shocks during 16 ms conforming to IEC 60068-2-27 IP degree of protection Terminals: IP20 conforming to IEC 60529 Casing: IP20 conforming to IEC 60529 Pollution degree 2 conforming to IEC 60664-1 Overvoltage category III conforming to IEC 60664-1 Insulation resistance > 500 MOhm at 500 V DC conforming to NF C 20-030 Ui rated insulation voltage < 60 V conforming to IEC 60664-1 Electromagnetic compatibility Immunity to microbreaks and voltage drops 7 ms conforming to IEC 61000-4-11 1.2/50 s shock waves immunity test 1 kV common mode conforming to IEC 61000-4-5 1.2/50 s shock waves immunity test 0.5 kV differential mode conforming to IEC 61000-4-5 Electrical fast transient/burst immunity test 1 kV PNP output wires conforming to IEC 61000-4-4 Radiated emission conforming to ETSI EN 300 328 Conducted emission conforming to ETSI EN 301 489-17 Radiated emission conforming to ETSI EN 301 489-17 Conducted RF disturbances 10 V conforming to IEC 61000-4-6 Electrical fast transient/burst immunity test 2 kV power supply wires conforming to IEC 61000-4-4 Susceptibility to electromagnetic fields 3 V/m, 1.4 MHz2 GHz at 3 m conform- ing to IEC 61000-4-3 Susceptibility to electromagnetic fields 10 V/m, 80 MHz...1 GHz at 3 m conform- ing to IEC 61000-4-3 Electrostatic discharge immunity test 6 kV on contact (on metal parts) conforming to IEC 61000-4-2 Electrostatic discharge immunity test 8 kV in free air (in insulating parts) conform- ing to IEC 61000-4-2 Conducted and radiated emissions class B conforming to CISPR 22 Immunity for industrial environments conforming to EN/IEC 61000-6-2 Offer Sustainability Sustainable offer status Not Green Premium product RoHS (date code: YYWW) Compliant - since 1510 - Schneider Electric declaration of conformity 2