Product datasheet
ZB4BG714
Characteristics
Main
Range of product Harmony XB4
Product or component type Head for key selector switch
Device short name ZB4
Bezel material Chromium plated metal
Mounting diameter 0.87 in (22 mm)
Head type Standard
Sale per indivisible quantity 1
Shape of signaling unit head Round
Return To centre
Operator profile Black key switch
Type of operator Spring return
Operator position information 3 positions +/- 45
Type of keylock Ronis 520E
Key withdrawal position Center
Complementary
CAD overall width 1.14 in (29 mm)
CAD overall height 1.14 in (29 mm)
CAD overall depth 2.83 in (72 mm)
Product weight 0.22 lb(US) (0.098 kg)
Resistance to high pressure washer 1015.26 psi (7000000 Pa) at 131 F (55 C),distance: 0.1 m
Mechanical durability 1000000 cycles
Electrical composition code C11 for 3 contacts using single blocks in front mounting
C7 for 4 contacts using single blocks in front mounting
C8 for 4 contacts using single and double blocks in front mounting
C4 6 contacts using single and double blocks in front mounting
C5 for 5 contacts using single blocks in front mounting
C6 for 5 contacts using single and double blocks in front mounting
C3 6 contacts using single blocks in front mounting
Device presentation Basic element
Environment
protective treatment TH
ambient air temperature for storage -40...158 F (-40...70 C)
ambient air temperature for operation -40...158 F (-40...70 C)
overvoltage category Class I conforming to IEC 60536
IP degree of protection IP67
IP66 conforming to IEC 60529
IP69K
IP69
NEMA degree of protection NEMA 13
NEMA 4X
standards EN/IEC 60947-1
EN/IEC 60947-5-1
EN/IEC 60947-5-4
EN/IEC 60947-5-5
UL 508
GB 14048.5
CSA C22.2 No 14
product certifications BV
CSA
DNV
GL
LROS (Lloyds register of shipping)
1 / 7
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.RINA
UL listed
vibration resistance 5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6
shock resistance 30 gn (duration = 18 ms) half sine wave acceleration conforming to IEC 60068-2-27
50 gn (duration = 11 ms) half sine wave acceleration conforming to IEC 60068-2-27
Offer Sustainability
WARNING: This product can expose you to chemicals WARNING: This product can expose you to chemicals including:
including:
Nickel compounds, which is known to the State of Nickel compounds, which is known to the State of California to cause cancer, and
California to cause cancer, and
Di-isodecyl phthalate (DIDP), which is known to the State Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth
of California to cause birth defects or other reproductive defects or other reproductive harm.
harm.
For more information go to www.p65warnings.ca.gov For more information go to www.p65warnings.ca.gov
Contractual warranty
Warranty period 18 months
Dimensions
Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Connection by Screw Clamp Terminals or Plug-in Connection by Faston Connectors
Connectors or on Printed Circuit Board
(1) Diameter on finished panel or support
(2) 40mm min. / 1.57in. min.
(3) 30mm min. / 1.18in. min.
+0.4 +0.016
(4) 22.5mm / 0.89in. recommended ( 22.3mm / 0.88in. )
0 0
(5) 45mm min. / 1.78in. min.
(6) 32mm min. / 1.26in. min.
Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection
Panel Cut-outs (Viewed from Installers Side)
2 / 7