Connectors (Inlets/Outlets)
GSP1
www.schurter.com /PG07
IEC Appliance Inlet C14 or C18, Screw-on Mounting, Rear Side, PCB terminals
C14 C18
70 C 70 C
Description Other versions on request
- Panel Mount , Screw-on mounting from rear-side - Ground terminal with quick-connect terminal 6,3 x 0,8 mm
- 1 Function : - With solder terminals
- Variant with notch for V-Lock mating Cordsets
- Appliance Inlet , Pin temperature 70 C , protection class I or II
Weblinks
- For PCB mounting
pdf datasheet, html-datasheet, General Product Information, RoHS,
CHINA-RoHS, REACH, Distributor-Stock-Check, Accessories, Detailed
Approvals
request for product, Microsite
- Approval Reference Type: GSP1
- VDE Certificate Number: 40012767
- UL File Number: E96454
- CCC File Number: 2006010204183838
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
Ratings UL/CSA 15 A / 250 VAC; 60 Hz
conditions) pin-temperature 70 C, 10 A,
Dielectric Strength > 3 kVAC between L-N
Protection Class I or II
> 3 kVAC between L/N-PE
(1 min/50 Hz)
Allowable Operation Tempe- -25 C to 70 C
rature
IP-Protection from front side IP 40 acc. to IEC 60529
Insulation cover Suitable for appliances with protection
class I or II acc. to IEC 61140
Terminal For PCB mounting ; Ground terminal:
Quick connect terminals 4.8 x 0.8 mm
angled or straight
Solder terminal on request
Panel Thickness s Screw: max 3 mm
Mounting screw torque max 0.5 Nm
Material: Housing Thermoplastic, black, UL 94V-0
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in General Product
Information
Connectors 1Connectors (Inlets/Outlets)
GSP1
www.schurter.com /PG07
Dimensions
24.3
25.5
3.6
22
49.6
0.15
40
0.1
29.9 R6
3.5
0.05
8.7
max.R5.9
+0.2
30.3 0
without insulation cover with insulation cover
0.15
40
Ground terminal Ground terminal
31.45
+0.1
3.4
0
0.05
8.7 angled to pin axis straight
Drilling diagrams
Variants GSP1.9xxx Variants GSP1.8xxx
+0.1 +0.1
_ _
0.05 0.05
9.05 0.2 9.05 0.2
7 7
0.15
40 0.15
40
X deleted for protection class II X deleted for protection class II
All Variants
Protection PCB terminal Mounting flange with Ground terminal 4.8 x 0.8 mm Cover Order Number
Class spacing
I 7/7.3 PCB side through holes, panel side pre-inserted nuts straight l GSP1.9413.1
I 7/7.3 holes for screws M3 angled to pin axis GSP1.9101.1
I 7/7.3 holes for screws M3 straight GSP1.9103.1
I 7/7.3 holes for screws M3 straight l GSP1.9113.1
I 7/7.3 holes for self-tapping screws 3mm, 4 screws enclosed straight GSP1.9503.1
I 7/7.3 pre-inserted nuts M3, 4 pcs. straight GSP1.9203.1
I 7/7.3 pre-inserted nuts M3, 4 pcs. straight GSP1.9203.121
I 9.05/9.7 PCB side through holes, panel side pre-inserted nuts angled to pin axis GSP1.8401.1
I 9.05/9.7 holes for screws M3 angled to pin axis GSP1.8101.1
I 9.05/9.7 holes for screws M3 angled to pin axis l GSP1.8111.1
I 9.05/9.7 holes for screws M3 straight GSP1.8103.1
I 9.05/9.7 holes for self-tapping screws 3mm, 2 screws enclosed angled to pin axis GSP1.8601.1
I 9.05/9.7 holes for self-tapping screws 3mm, 2 screws enclosed straight l GSP1.8613.1
I 9.05/9.7 holes for self-tapping screws 3mm, 4 screws enclosed angled to pin axis GSP1.8501.1
I 9.05/9.7 holes for self-tapping screws 3mm, without screws angled to pin axis GSP1.8701.1
2 Connectors
27.8
0.1
7.3
0.5
3.5
+0.1
3.4 0
1.6
0.1
15.85
0.1
15.85
3.6
0.1
21.9
0.1
9.7
14.25
1.6
3.6
+0.2
22.5 0