Opto Isolator - RS232 Complete electrical isolation Up to 9600 baud 10 kv breakdown isolators An in-line opto isolator for protecting equipment against spurious voltage surges Allows equipment to be interconnected where local ground potentials differ at either end of the connection Typical applications include connecting equipment in electrically noisy environ- ments and blocking computer generated noises from sensitive instruments Fitted at one end with a 9 way male D connector and with a 9 way female D connec- tor at the other Supplied in a rugged machined plastic housing The device will run off the signal lines, however, power can be applied seperately if re- quired (8 to 25 volts but the voltage must be higher than the peak signal voltage) See cables below for connection to device 221588 Price Each Type Order Code Opto Isolator 133-9798 9 way male to 9 way female cable 133-9794 9 way female to 25 way male cable 133-9797 25 way female to 9 way male cable 133-9796X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for scimar manufacturer: Other Similar products are found below : OP232/D1