ENFORCER SS-072Q Tamper Switch Type: S 49J5 UL Listed for Supplementary Protection FEATURES: Used in alarm systems with normally-closed circuits. Silver-plated contact ensures reliability and long-term operation. Small size makes it easy to hide and install. SPECIFICATIONS: Plunger Pushed in: Contact closed Plunger Released: Contact Open Contact Rating: 0.5A at 50 VDC Enclosure: High-impact Plastic Resin 3 1 5 Size: 2- / x 1- / x / (70 x 28 x 16mm) 4 16 8 Weight: 18 gm INSTALLATION INSTRUCTIONS: 1. Decide the appropriate position for the SS-072Q. (Note that the switch must be positioned so that it will be depressed at least 1/4 6mm to ensure contact is closed). 2. Drill the three holes necessary for the SS-072Q to be mounted firmly in place. The diameter of the hole is 1/8 (3mm). Screws should be selected according to your own particular preference and need. 3. Connect the wires to the switch terminals, using series circuitry, see illustration on Fig.1. Fig.1- Used inside cabinet or drawer to trigger alarm Important Note: When mounting the tamper switch, keep in when cabinet or drawer is pulled open. mind that the switch must be depressed at least 1/4 (6mm) distance in order to activate the switch. 1/4(6mm) Minimum activation distance Drill three holes, each Inside of hole 1/8 (3mm) and insert screws. alarm case Connect the wires to switch terminals using series circuitry. To alarm system Note: Products with model number that ends with or have a green Q sticker represents RoHS compliant products.Case body Wall Hole must be made Fig.2- Case against wall. for the tamper Use 2 SS-072Q to protect against the forced switch to fit through removal of the case from the wall and the forced To alarm removal of the cases cover or lid. system Case cover / lid Fig.3- Used inside box when top is opened upward or lifted off. Case cover / lid To alarm system The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is not responsible for misprints. WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARMs obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of SECO-LARM, and the purchasers exclusive remedy, shall be limited to replacement or repair only, at SECO-LARMs option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damages of any kind to the purchaser or anyone else. MuSS-072Q 1108.pmd SECO-LARMSECO-LARMEE LL RR U.S.A.,U.S.A.,.S.S Inc.,Inc.,cc 16842 Millikan Avenue, Irvine, CA 92606 Website: www.seco-larm.com Order Part 763-041-2% E-mail: sales seco-larm.com PITSW1 Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326 Copyright 2011 SECO-LARM U.S.A., Inc. All rights reserved.