Raspberry Pi High Quality Camera Getting started Operating instructions, regulatory compliance information, and safety information Published in April 2020 by Raspberry Pi Trading Ltd. www.raspberrypi.orgOperating instructions Dust cap Optional C-CS adapter Back focus adjustment ring Back focus lock screw Optional tripod mount Main housing and sensor Ribbon cable to Raspberry Pi Main circuit board Mounting holes Fitting lenses The High Quality Camera is designed to accept CS-mount lenses. An optional adapter is supplied to extend the back focus by 5 mm , such that the camera is also compatible with C-mount lenses. Please ensure that the dust cap is fitted when there is no lens fitted, because the sensor is sensitive to dust. To fit a lens, unscrew the dust cap and screw the lens into the threads. Remove the C-CS adapter when a CS-mount lens is to be fitted it is only required when a C-mount lens is fitted. The CGL 6 mm CS-mount and 16 mm C-mount lenses are examples of third- party products that are compatible with the High Quality Camera. See step-by- step instructions for fitting the CS-mount and C-mount lenses. Back focus adjustment The back focus adjustment mechanism has two purposes: 1. When using a small, low-cost, fixed-focus lens, it allows adjustment of the focus. 2. When using an adjustable-focus lens, it allows adjustment of the focal range. To adjust the back focus: 1. Ensure the lens is screwed all the way into the back focus adjustment ring. 2 Raspberry Pi High Quality Camera Getting Started