Z-turn Lite
766MHz Xilinx XC7Z007S or XC7Z010 ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic
512MB DDR3 SDRAM (2 x 256MB, 32-bit), 4GB eMMC Flash, 16MB QSPI Flash
Micro USB2.0 OTG, 1 x 10/100/1000M Ethernet, TF, Debug UART, JTAG
Optional Camera Modules and IO Extension Cape
Supports 7-inch LCD Module through Z-turn Lite IO Cape
Minimal and compact system of Xilinx Zynq-7007S or Zynq-7010 SoC
Ready-to-Run Linux Single Board Computer
Figure 1-1 Z-turn Lite Board
The Z-turn Lite is an ultra-cost-effective lite version of MYIRs Z-turn board. It is built around Xilinx Zynq-7007S
(Single-core) or Zynq-7010 (Dual-core) ARM Cortex-A9 MPCore processor and can work at up to 766MHz. It is a
minimal and compact system of Xilinx Z-7007S or Z-7010 SoC and provide numerous pending configuration of PL
resources.
The Z-turn Lite takes full features of the Zynq-7007S or Zynq-7010 SoC which leverages the 28nm scalable
optimized programmable logic used in Xilinxs 7 series FPGAs. The board is equipped with 512MB DDR3, 4GB
eMMC Flash, 16MB QSPI Flash and a set of peripherals on board including Micro USB OTG, 10/100/1000Mbps
Ethernet, TF, JTAG, Debug UART, etc. Additionally, there is one 120-pin Expansion connector on the rear of the
board to bring out as many as IO signals for user extensions.
The Z-turn Lite is capable of running Linux operating system and provided with Linux 3.15.0 SDK, the kernel and
many drivers are in source code. The Z-turn Lite Kit is delivered with complete accessories including one micro
USB cable, one Ethernet cable, one 4GB TF card, one USB-to-UART cable and one 5V power adapter and product
disk which enables you to start the development quickly when getting the board out-of-the-box. It is an excellent
reference design and evaluation board for development based on Xilinx Zynq-7000 series SoCs.
1 / 7
Hardware Specification
The Zynq-7000 AP SoC leverages the 28nm scalable optimized programmable logic used in Xilinxs 7 series FPGAs.
It comprises single and dual ARM Cortex-A9 equipped devices, providing processor scalability across the platform
Zynq-7000S and Zynq-7000.
Zynq-7000S devices are the cost optimized entry point to the Zynq-7000 SoC platform. With a single-core ARM
Cortex-A9 processor mated with 28nm Artix-7 based programmable logic, Zynq-7000S devices are ideal for
industrial IoT applications such as motor control and embedded vision.
Zynq-7000 devices are optimized for performance-per-watt and maximum design flexibility. Dual-core ARM
Cortex-A9 processors are integrated with 7 series programmable logic to enable highly differentiated designs for a
wide range of embedded applications.
Figure 1-2 ZYNQ-7000 Device Family
2 / 7