LTP2000 series 24V Print Mechanisms LTP2000 Series The versatile LTP2000 direct thermal print mechanism series delivers exceptional value with proven 2 , 3 and 4 models. The ability to print both receipts and labels, coupled with straight and curved paper path alternatives, and an auto-cutter rated for up to 300,000 cuts, enables these units to tackle the broadest array of applications, including medical devices, kiosks, point of sale systems, and more. LTP2242 Product Specifications LTP2242 LTP2342 LTP2442 Model Printing Method Thermal line dot printing 576 No. dots/line 432 832 8 Resolution (dots/mm) 8 8 +0 +0 +0 LTP2342 -1 80 -1 -1 Paper width (mm) 60 112 72 Printing width (mm) 54 104 75 Speed (max mm/sec) 90 75 Paper path Straight/Curved Head-up detection Sensors By thermistor Platen position detection By mechanical switch Out of paper detection (Not shown: LTP2442) By photo interrupter Operating voltage (Vp) Power supply 21.6 to 26.4 Operating voltage (Vdd) (V) 4.75 to 5.25 Head Peak current (A) 4.3(26.4V/288 dots) Motor 0.5 90 mm/sec print speed Pulse activation Service life 100 million * Abrasion resistance (km) 50 Choice of interface board or processor, Operating adding design flexibility 0 to 50 temperature (C) Dimensions ** ** ** 85.2x61.4x27.0 106.4x61.4x27.0 138.2x61.4x27.0 Label and receipt printing support (WxDxH mm) Approx. 115 Mass Approx. 135 Approx. 160 Seiko Instruments USA Inc. Thermal Printer Division 2990 Lomita Blvd., Torrance, CA 90505 Telephone (310) 517-7778 Facsimile (310) 517-8154 Email: printerinfo seikoinstruments.com www.siiprinters.com LTP2000-5-11LTP2000 series 24V Print Mechanisms Interface Board IF2301-01B IF2301-01BK Model CPU PT230P01 Operating voltage (V) Vp:21.6 to 26.4, Vcc:4.5 to 5.5 Character matrix (HxW dots) 16 dot characters: 16x8, 16x16 24 dot characters: 24x12, 24x24 Character type Optional font Yes Yes Downloaded character Yes Yes User-defined character Yes Yes Extended graphics character set Yes Yes Katakana character set No Yes JIS 1&2 level Kanji No Yes Interface Parallel, Serial (C-MOS) Dimensions (WxDxH mm) 90.0x100.0x22.0 CPU PT230P01 Model Package form 128 pin QFP Vp:21.6 to 26.4, Vcc:4.5 to 5.5 Operating voltage (V) 18.43 +/-0.5% Operating frequency (MHz) C-MOS LSI Configuration Interface Parallel, Serial Character type Extended graphics character set, Other characters available with CGs or external RAM Character matrix (HxW dots) 16 dot characters: 16x8, 16x16 24 dot characters: 24x12, 24x24 Dimensions (WxDxH mm) 22.0x16.0x3.1 Auto-Cutter ACU2224 ACU2324 ACU2424 Model Cutting Method Slide type +0 +0 +0 60 80 112 Paper width (mm) -1 -1 -1 * 65 to 125 Paper thickness (m) Full cut/Partial cut (Leaving center point) Cutting type Operating time 0.5 (max sec/cycle) Cutting pitch 10 (min. mm) Cutting frequency 30 (max cuts/min) Operating Motor 21.6 to 26.4 Voltage (V) Detector (control switch) 4.75 to 5.25 Starting Current (A) 1.2 Life (cut) 300,000 Dimensions (WxDxH mm) 79.0x66.5x 100.0x66.5x 126.0x69.3x 16.5 17.0 17.5 Mass (g) Approx. 120 Approx. 200 Approx. 260 *Use recommended thermal paper **Excluding protrusion Seiko Instruments USA Inc. Thermal Printer Division 2990 Lomita Blvd., Torrance, CA 90505 Telephone (310) 517-7778 Facsimile (310) 517-8154 Email: printerinfo seikoinstruments.com www.siiprinters.com LTP2000-5-11