69 mm
83.1 mm
LTPD/CAPD Series
Low Voltage Printer Mechanisms
Small
LTPD/CAPD series mechanisms free up critical design real estate.
The new mechanisms provide a smaller overall form factor,
innovative angled paper guide requiring less depth, and a smaller
pitch flexible print circuit (FPC) cable.
Fast
LTPD/CAPD series mechanisms are fast, rated for up to 100
mm/second print speeds. This gives mobile devices a much
needed performance boost.
Reliable
LTPD/CAPD series mechanisms offer a minimum of 50 km of total
printing and 100 million pulses. CAPD models offer a new built-in
auto-cutter design, improving cutter reliability. The result: reliable
Designing mobile devices is increasingly
media output, every time.
challenging. Customers expect each new
Flexible
product generation to be smaller and
LTPD/CAPD series mechanisms offer a wide array of form factor
faster, with long battery life. To be
choices to provide versatility and flexibility for smoother integration.
competitive, device manufacturers must
Options include EZ-OP clamshell-style and auto-loading models,
reduce product size and increase speed.
ASIC and interface board solutions, and both horizontal and vertical
Time to market is crucial and reliability is
mechanical orientation designs.
non-negotiable.
2 and 3 print width models
New low voltage LTPD/CAPD series
High speed printing (up to 100 mm/second)
printer mechanisms tackle these
challenges with dramatic advances in
Choice of horizontal and vertical orientations
design flexibility, reliability, and printing
EZ-OP clamshell and auto-loading paper
performance.
replacement options
Platen latch for better shock absorption
Built-in auto-cutter (CAPD models)
30 mm
15 mm
35.4 mm
26.9 mm
2 LTPD model and 2 CAPD model.
Product Specifications
Model LTPD245 LTPD345 CAPD245 CAPD345
Thermal line dot printing
Method
Number of dots/line 384 576 384 576
8
Resolution(dots/mm)
+0-1 +0-1 +0-1 +0-1
Paper width (mm) 58 80 58 80
Printing
48 72 48 72
Printing width (mm)
Speed (max mm/sec) 100 80 100 80
Curved
Paper path
By thermistor
Head temperature
Platen position detection By mechanical switch
Sensors
By photo interrupter
Out of paper detection
Cutter home position detection - - By photo interrupter
Power
Operating Voltage (Vdd) 2.7 to 3.6/4.75 to 5.25
supply (V)
-
Operating Voltage (Vp) - 4.75 to 9.5 6.5 to 9.5
3.66 (9.5V/64dots) 3.60 (9.5V/64dots) 3.66 (9.5V/64dots) 3.60 (9.5V/64dots)
Head
Peak 5.40 (9.5V/96dots)
5.49 (9.5V/96dots) 5.49 (9.5V/96dots) 5.40 (9.5V/96dots)
current (A)
Motor 0.6 0.6 0.6 0.6
-
Cutter motor - 0.7 0.7
Service life Pulse activation (pulses) 100 million 100 million
50 *
Abrasion resistance (km)* 50 *
Operating temperature (C) -10 to 50 -10 to 50
Dimensions 83.1 x 35.4 x 26.9 **
Horizontal 69.0 x 30.0 x 15.0 ** 91.0 x 30.0 x 15.0 ** 105.1x35.4x27.2***
(W x D x H mm)* 69.0 x 15.0 x 30.0 ** 91.0 x 15.0 x 30.0 **
Vertical
g
Mass( ) Approx. 58 Approx. 125 Approx. 148
Approx. 40
- - Slide cutting
Method
Paper thickness (um) - 54 to 78*
- 54 to 90*
Cutting type Full cut and partial cut (1.50.5mm tab left at the center)
- -
Auto-cutter
Operating time (sec/cycle)
-
-
Approx 1.0
Minimum paper cutting
length (mm)
- -
10
Cutting frequency
-
(max cuts/min) -
30
-
Life span Paper cutting (cuts) -
500,000 *
*Use recommended thermal paper. **Excluding convex section.
***Excluding mounting part. Specifications are subject to change without notice.
IF Board Specifications Optional Cables
Accessory Product
IFD501-01UK-E IFD501-01SK-E
CPU PTD50P01-E Power Cable DC-04100A-E
LTPD245, LTPD345 Series
Switch Cable OC-D1430A-E
Corresponding Model
CAPD245, CAPD345 Series Serial Cable OC-D0730A-E
Operating Voltage (V) Vp:4.75 to 9.5
USB Cable IFC-U01-1-E
16 dots character: 16 x 8, 16 x 16
Character matrix (H x W dots)
24 dots character: 24 x 12, 24 x 24
Optional font
Yes Yes
Downloaded character Yes Yes
User-defined character
Yes Yes
Character
Extend graphics character set Yes Yes
Type
Katakana character set Yes
Yes
Codepage 1252 Yes Yes
JIS 1&2 level kanji Yes
Yes
Serial
USB(2.0)
Communication interface
(RS-232C)
Dimensions (W x D x H mm) 69.0 x 50.0 x 14.0
ASIC Specifications:
PTD50P01-E
Corresponding model
LTPD245, LTPD345 series
CAPD245, CAPD345 series
Package form 120pin QFP
Operating voltage (V)
Vp:4.75 to 9.5,Vcc:3.0 to 3.6
Operating frequency (MHz)
12MHz0.01%
Configuration
C-MOS LSI
Communication interface
Parallel, Serial, USB
Character type Extended graphics character set
Other characters available
With CGs or external memory
Character matrix
16 dot character: 16 x 8, 16 x 16
(H x W dots)
24 dot character: 24 x 12, 24 x 24
Dimensions
16.0 x 16.0 x 1.7
(W x D x H mm)
Seiko Instruments USA Inc.
Thermal Printer Division
2990 Lomita Blvd., Torrance, CA 90505
Telephone (310) 517-7778
Facsimile (310) 517-8154
Email: printerinfo@seikoinstruments.com
www.siiprinters.com
LTPD/CAPD-711