IOT8EUSBREF-1 Semtech

Smart Building Reference Kit User Guide IOT8EUSBREF-1 (EU 868) IOT9USSBREF-1 (NA 915) June 2019 Welcome The Smart Building Reference kit is designed to provide validation of the network coverage within a building, accelerate solution development and facilitate a portable demonstration to a wide range of stakeholders. By moving the location of the sensors to different spots around the building, users can determine a gateways range of coverage. By relying on readily-available hardware, solution developers can focus on providing customer value through data collection and analysis while using off-the-shelf hardware available from external suppliers. The self-contained nature of the Reference Kit makes it easy to set up, take down and move the network in a matter of minutes. All data collected in the kit is displayed on a dashboard accessible by the user via a browser. The dashboard shows the type of display which can be created with the data collected. The URL for the dashboard and how to locate the log in credentials for your kit, are explained under the Getting Started section of this guide. Note: The reference kit does not allow access to the underlying data directly or the ability to change the LoRaWAN Network Server (LNS) to which the gateways are connected. If those are desired requirements, please contact Semtech at SBKSales semtech.com. Additionally the user may separately access a dashboard that shows a permanent installation of a Smart Building Reference Solution Kit inside an office facility. This provides the user with a rich set of historical data to use in demonstrations. To access this dashboard, log in to the following site, using the credentials below. URL: lora-developers.semtech.com/smart-building-kit Login: SemtechDemo1 Password: LoraWan592 The data in each dashboard is stored for a maximum of 30 days. In this document we explain how to set up and use the kit. Smart Building User Guide Proprietary Information Semtech Corporation