TS14002-C033DFNR Semtech

TS14002 nanoSmart Ultra-Low-Power Linear Regulator TRIUNE PRODUCTS Features Description Ultra-low nA operating current at light load The TS14002 linear regulator is an ultra-low-power circuit Best-in-class quiescent current of 20nA at Iload=0 which draws low nA level quiescent current at light load, but Best-in-class quiescent current of 100pA in disable mode Output voltage options of 1.2V - 4.2V in 100mV steps (pro- has the capability to regulate current loads as high as 150mA. grammed at manufacturing) Accurate output regulation Applications Over-current protection Portable electronics RFID Summary Specifications Industrial Low input operating voltage of 2.5V to 5.5V Medical Packaged in a 8pin DFN (2x2) Energy harvesting systems Product is lead-free, Halogen Free, RoHS / WEEE SmartCard compliant Typical Applications Datasheet VOUT VCC Current Limit FB Reference Voltage EN GND Pin Description (1) Pin Pin Name Pin Type Description 1 GND P Ground 2 V O Regulated Output Voltage OUT 3 NC No Connect (connect to GND or float) 4 NC No Connect (connect to GND or float) 5 NC No Connect (connect to GND or float) 6 FB I Feedback Input 7 V P Input Power CC 8 EN I Enable Input (1) I = Input, O = Output, P = Power Absolute Maximum Rating (2, 3, 4) Over operating freeair temperature range unless otherwise noted Parameter Value Unit V , V , EN, FB -0.3 to 6.0 V CC OUT Electrostatic Discharge (Human Body Model) 2 kV Operating Junction Temperature Range, T -40 to 85 C J Storage Temperature Range, T -65 to 150 C STG Reflow Temperature (soldering, 10 seconds) 260 C (2) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating con- ditions is not implied. Exposure to absolutemaximumrated conditions for extended periods may affect device reliability. (3) All voltage values are with respect to network ground terminal. (4) ESD testing is performed according to the respective JESD22 JEDEC standard. Datasheet