112CP SERIES Combined Pressure & Temperature Sensor DESCRIPTION PERFORMANCE CHARACTERISTICS The 112CP series combined pressure and temperature Pressure Ranges 0 to 150 psi through 0 to 650 psi sensors delivers the benefit of both pressure and in- Pressure Accuracy 0.8% F.S. (linearity, hysteresis, stream temperature sensing in a single, robust integrated repeatability and calibration) package. Total Error Band 1.7% F.S. (0C to +85C) Sensata Technologies has been a leading global supplier Proof Pressure 2X of pressure sensors and switches for over 50 years. Burst Pressure 3X Temperature Accuracy 1% (delta R/R) Resistance 25C 10K or 100 ohms Operating Temperature -40C to 135C Suppy Voltage (V ) 4.5 to 5.5 VDC CC Output Voltage 0.5 to 4.5 VDC FEATURES Supply Current 15.0 mA Pressure and temperature measurement in one package Output Current 8.0 mA Fast, in-stream temperature measurement Precise superheat measurement Output Load Range 10K to 50K ohms Overvoltage Protection 16 VDC Reverse Voltage Protection -14 VDC Output Response Time 10mS Cycle Life 1M cycles Vibration 5g APPLICATIONS Drop (any Axis) 1m Air conditioning & refrigeration Alternative energy management Electrical Connection 4 pin AMP Micro-Quadlok System Engine controls & monitors connector Compressors & pumps Weight 1.5 oz max Approvals RoHS, REACH available *Refer to chart for seal compatibility NOTE: Not suitable for use in conductive media Micro-Quadlok System is a trademark of Tyco Electronics CorporationDIMENSIONAL DRAWINGS 2.56 MAX 65.02 INCHES MM 0.764 0.004 19.4 0.10 0.366 0.004 9.3 0.10 0.104 0.004 2.64 0.10 POWER PRESSURE OUTPUT (V ) IN (V ) OUT 0.394 10.0 0.720 18.29 M12 x 1.25 - 6g THREAD GROUND TEMPERATURE OUTPUT 6 (GND) O-RING (R ) OUT REF. STANDARD OFFERINGS SEAL COMPATIBILITY GUIDE Pressure Connections Seal Media Max Seal M12 x 1.25 - 6g plated steel Material Compatibility Temperature Range 1 / 4 N P T m a l e b r a s s Nitrile Petroleum oils, lubricants, -20C to 100C (BUNA-N, NBR) detergent solutions, helium Pressure References HNBR Petroleum oils, lubricants, Absolute -20C to +135C (Hydrogenated Nitrile) detergent solutions Sealed gage Ethylene Steam, soaps, polar solvents, -40C to +135C Pressure Ranges Propylene brake fuilds, acetone, Skydrol 9.0 to 150 psia Chlorinated solvents, oils, Fluorosilicone -40C to +135C 26.8 to 500 psia fuels, air Elastomer Seals Refrigerants Neoprene -40C to +120C (freons/ammonia) See Seal Compatibility Guide Fertilizers, freons, butanes, oils, Fluorocarbon (Viton) -35C to +135C trichlorethylene STANDARD PART NUMBERS Part Number Pressure Pressure Connection Thermistor Internal Seal Thread O-Ring M12 x 1.25 - 6g plated 112CP3-4 9 to 149 psia 10k Ohm 25C Neoprene Neoprene steel 112CP3-6 9 to 149 psia 1/4 NPT male brass 10k Ohm 25C Nitrile M12 x 1.25 - 6g plated 112CP3-8 9 to 500 psia 10k Ohm 25C Neoprene Neoprene steel 112CP3-9 9 to 500 psia 1/4 NPT male brass 10k Ohm 25C Nitrile Important Notice: Sensata Technologies (Sensata) reserves the right to make changes to or discontinue any product or service identified in this publication without notice. Sensata advises its customers to obtain the latest version of the relevant information to verify, before placing any orders, that the information being relied upon is current. Sensata assumes no responsibility for infringement of patents or rights of others based on Sensata applications assistance or product specifications since Sensata does not possess full access concerning the use or application of customers products. Sensata also assumes no responsibility for customers product designs. www.sensata.com 1.888.438.2214 sensors sensata.com 112CP Series September 2014