3RHP Series AC Control 100K-cycle UL508 Endurance Rating for Enhanced Reliability 40 and 50A output Voltage ratings to 600 VAC Lifetime 2 million operations at full load LED input status indicator Wire, lug or quick connect termination Industry Standard DP contactor mounting PRODUCT SELECTION (by control voltage and output rating) Control Voltage 40A 280 VAC 50A 280 VAC 40A 600 VAC 50A 600 VAC 20-26 VAC 3RHP2840E 3RHP2850E 3RHP6040E 3RHP6050E 100-130 VAC 3RHP2840F 3RHP2850F 3RHP6040F 3RHP6050F 208-240 VAC 3RHP2840G 3RHP2850G 3RHP6040G 3RHP6050G OUTPUT SPECIFICATIONS (voltage) Description 280 VAC 600 VAC Operating Voltage (47-63Hz) Vrms 24-280 48-600 Maximum Off-State Leakage Current per channel 0.05 mA 240 VAC 0.06 mA 480 VAC OUTPUT SPECIFICATIONS (current) Description 40A 50A Maximum Load Current per phase 40C Arms (1) 40A Resistive 50A Resistive Power terminals 1/4 Quick Connect and 10x32 binder 1/4 Quick Connect and box lugs head screws Wire Size 8-14 AWG 6-14 AWG INPUT SPECIFICATIONS Description SUFIX E SUFIX F SUFIX G Coil Voltage 50/60 Hz 20-26 VAC 100-130 VAC 208-240 VAC Min. Turn-On Voltage 20 VAC 100 VAC 208 VAC Min. Turn-Off Voltage 12 VAC 24 VAC 48 VAC Coil Power Consumption, inrush. 56 VA 24 VAC 56 VA 120 VAC 56 VA 220 VAC Coil Power Consumption, sealed. 6.6 VA 24 VAC 6.6 VA 120 VAC 6.6 VA 220 VAC GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input to Output 4000 Vrms Dielectric Strength, Input/Output to ground 2500 Vrms Contacts (2) Three Normally Open Ambient Operating Temperature Range (3) -20 to 65 C Ambient Storage Temperature Range -40 to 100 C Max. Turn-On Time 50/60 Hz 20 ms / 16.6 ms Max. Turn-Off Time 50/60Hz 40 ms / 32 ms Maximum Number of Operations 30 per Minute Lifetime Number of Operations Rated Current (4) > 2 Million Weight (typical) 1.19 lbs (540 g) Screw Torque (input/Output) 40A 4.4-5 in lb (0.5-0.6 Nm) / 15-18 in lb (1.7-2.1 Nm) Screw Torque (input/Output) 50A 4.4-5 in lb (0.5-0.6 Nm) / 20-25 in lb (2.2-2.9 Nm) GENERAL NOTES (1) See Derating curves for additional operating conditions. (2) The RHP includes a Solid State Relay, therefore electrical isolation is not provided. (3) The RHP includes over temperature protection for the solid state relay. (4) 40C ambient temperature, 30 operations/min, maximum voltage control. ObsoleteMECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION Obsolete