84060001 Sensata

Panel Mount Datasheet SMART MODULE Supplies electrical and visual feedback if an error occurs in the circuit or with the host SSR 4 to 32 VDC Push-Pull Transistor Alarm Output 4000 Vrms Optical Isolation 1200 VAC Peak Off-State Blocking Voltage UL/cUL recognized Compatible with any IP00 GN Series SSR (Generation 3) with AC output and DC input PRODUCT SELECTION Description Part Number SSR Monitoring Module 84060001 (1) INPUT SPECIFICATIONS Description 84060001 Nominal Voltage 5-24 VDC Maximum Voltage 32 VDC Minimum Voltage 3 VDC 1 VDC Off-State Voltage (2) DC SUPPLY / ERROR SIGNAL Description 84060001 Supply Voltage 4-32 VDC Supply Current 15-30 mA Error Output Voltage (4) 4-32 VDC 30 mA Error Output Current (5) LINE VOLTAGE 84060001 Description Line Voltage 24-660 Vrms Off-State Blocking Voltage (6) 1200 Vpk 8 mArms Off-State Leakage Current (7) GENERAL SPECIFICATIONS 84060001 Description Operating Temperature -20 to +80C Storage Temperature -40 to +100C Input to Output Isolation (8) 4000 Vrms Turn-On Time 8.3 mSec 8.3 mSec Turn-Off Time GENERAL NOTES (1) Specications apply to an ambient of -20 to 80C unless otherwise noted. (2) Dened as the maximum allowable voltage on the input terminals of the SSR for the module to sense an off-state condition. (3) Referenced to pin 4 (common) of the SSR. (4) 30 mA max 32 VDC supply voltage current regulated. (5) During normal operation of the SSR Error output=DC suppply voltage. (6) Maximum 1 minute duration. (7) At maximum line voltage. (8) At 25C for 1 Second. (9) HV GN Series DC Input Range is 4-32 Vdc. (10) Input, Output and DC Power Supply voltages are referred to the same common Ground. Do not forget to visit us at: www.crydom.com Copyright 2016 Crydom Inc. Specifications subject to change without notice.Panel Mount Datasheet MECHANICAL SPECIFICATIONS Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches millimeters 1.10 27.9 1.70 43.2 1.0 25.4 OPERATION INDICATOR ON OFF BLINKING INPUT NO INPUT TO ON N/A POWER TO SSR (GREEN LED) SSR ERROR NORMAL INTERNAL EXTERNAL SHORT (RED LED) OPERATION SHORT OR OPEN CIRCUIT 4-32 VDC 0 VDC 0 VDC ERROR OUTPUT (DC SUPPLY) (GROUND) (GROUND) SIGNAL WIRING DIAGRAM AC Line (24-660 Vac) SOLID STATE RELAY Error Output (9) (4-32 Vdc) DC Power Supply (9) (4-32 Vdc) Error indicator Input indicator Input (3-32 Vdc) (10) Ground (2) Do not forget to visit us at: www.crydom.com Copyright 2016 Crydom Inc. Specifications subject to change without notice.