84134910 Sensata

Panel Mount Datasheet GNA5 Series Current rating 10 and 25 Amps Output voltage 24-280 VAC Triac Output (Resistive Loads Only) Available with or without IP20 touch-safe cover LED Input Status Indicator UL Approved, CE Compliant to EN60950-1 Improved SEMS screw and washer Screw or Quick Connect Redesigned housing with anti-rotation barriers EMC Compliant to level 3 For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 10 A 25 A 3-32 VDC 84134900 84134910 90-280 VAC 84134901 84134911 AVAILABLE OPTIONS Touch Safe Cover Rated Load Current Thermal Pad 4: Not included (IP00) 0: 10 Amps Blank: Not included Series 1: 25 Amps 7: Included (IP20) H: Included 8413 4 9 1 U0 H Operating Voltage Control Voltage 9: 24-280 VAC/ 0: 3-32 VDC Zero Voltage Turn-On 1: 90-280 VAC 4: 3-32 VDC 3/16 QC input 1/4 QC output Required for valid part number 5: 90-280 VAC 3/16 QC input terminals For options only and not required for valid part number 7: 3-32 VDC 1/4 QC input (IP00 only) 9: 90-280 VAC 1/4 QC input (1) OUTPUT SPECIFICATIONS Description 10 A 25 A Operating Voltage (47-63Hz) Vrms 24-280 24-280 Transient Voltage Vdc (2) 600 600 Maximum Off-State Leakage Current Rated Voltage mArms 0.1 0.1 Minimum Off-State dv/dt Maximum Rated Voltage V/sec 500 500 Maximum Load Current Arms (3) 10 25 Minimum Load Current mArms 100 100 Maximum 1 Cycle Surge Current (50/60Hz) Apk 90/100 239/250 1 Second surge current (Apk. Ta=25C) 50/60 Hz 30 75 Maximum On-State Voltage Drop Rated Current Vpk 1.5 1.3 Thermal Resistance Junction to Case (Rjc) C/W 2.2 0.8 Maximum 1/2 Cycle I t for Fusing (50/60Hz) A sec 41/42 285/259 Minimum Heat Sink for Rated Current 40C C/W 3 1.5 Do not forget to visit us at: www.crydom.com Copyright 2016 Crydom Inc. Specifications subject to change without notice.Panel Mount Datasheet (1) INPUT SPECIFICATIONS Description DC Control AC Control Control Voltage Range 3-32 VDC (4) 90-280 VAC (5) Maximum Reverse Voltage -32 VDC - Minimum Turn-On Voltage 3 VDC 90 VAC Must Turn-Off Voltage 1 VDC 10 VAC Minimum Input Current (for on-state) 9.5 mA 5 mA Maximum Input Current mA 14mA 8.5 mA Nominal Input Impedance Ohms Current Limited Maximum Turn-On Time msec 1/2 Cycle (6) 20 Maximum Turn-Off Time msec 1/2 Cycle 30 (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input to Output (50/60Hz) 4000 Vrms Dielectric Strength, Input/Output to Ground (50/60Hz) 2500 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range (7) -40 to 80 C Ambient Storage Temperature Range -40 to 100 C Weight (typical) 2.46 oz (70 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 Humidity per IEC60068-2-78 93% non-condensing LED Input Status Indicator Green 11,641,553 hours (1,328 years) MTBF (Mean Time Between Failures) at 40C ambient temperature (8) 7,210,376 hours (823 years) MTBF (Mean Time Between Failures) at 60C ambient temperature (8) GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) Output will self trigger between 450-600Vpk not suitable for capacitive loads. (3) Heat sinking required, see derating curves. (4) Increase minimum voltage by 1V for operations from -20 to -40C. (5) For ambient temperatures above 40C the maximum control voltage must not exceed 250 VAC. (6) Turn-on time for Instantaneous turn-on versions is 0.1 msec. (7) AC models operating range is -20 to 80C. (8) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report). (9) Load can be wired to either SSR output terminal 1 or 2. (10) For single surge pulse Tc=25C Tj=125C. For AC Output SSRs, AC Rms value of surge current equals the peak value divided by 2 (1.414). For additional information or specic questions, contact Crydom Technical Support. Do not forget to visit us at: www.crydom.com Copyright 2016 Crydom Inc. Specifications subject to change without notice.