Dual Output Hall Effect Sensor Fully Redundant, Non-Contacting Rotary 9900 Series The BEI Sensors 9900 Series offers a non-contacting Hall effect sensor in a rugged design, ideally suited for tight packaging constraints while providing superior reliability and durability. Unlike most similar products, the 9900 provide the full redundancy of two independent Hall detectors in a common package (single output sensors also available). Each Hall detector is rigidly supported to meet the severe durability requirements of demanding applications as automotive and off-highway. Rotating sintered magnets enable the stationary detectors to perform with improved accuracy and reliability, including excellent temperature stability and corrosion resistance. One-time factory programmability allows for greater flexibility in design and custom outputs. Fully sealed, (meeting and/or exceeding IP66/IP67 standards) the 9900 is impervious to contamination and moisture. An integrally MECHANICAL molded, 6-pin connector makes a sealed connection with industry standard Packard Electric connectors. 9900 Series Features: SENSOR 1 * Rotating magnet/Fixed sensor configuration Provides improved accuracy and reliability Two independent outputs for redundancy SENSOR 2 * Full redundancy assures back-up safety Fully programmable Outputs offset, gain, slope and temperature compensation Sintered Alnico-8 magnets * OTHER OPTIONS AVAILABLE Provide excellent temperature stability and corrosion resistance Ratiometric Output Ordering Information: Factory programming through connector After completion of assembly provides high accuracy 990X XXX XX XX Sealed construction Temperature Rating: IP66/IP67, 6-pin I/O Interface to Packard Electric Connector Blank = Standard 85C, HT = 125C Spring Return: Extended temperature range CW = Clockwise, CCW = Counter -40 to +150C available optionally Clockwise, NS = No Spring Return Return spring (CW standard, CCW optional) Electrical Angle: Eliminates mechanical backlash ie. 090 = 45, 120 = 60 Number of Sensors: Extended operating life 1 = Single Output, 2 = Dual Output 35 million operational cycles SAMPLE: 9902 090 CW Standard 85C CW = Clockwise Spring Return 90 (45) Electrical Angle Dual Output 15771 Red Hill Avenue Tustin, CA 92780-7303 (714) 258-7500 Fax: (714) 258-8120 email: sales beiduncan.com ISO9001 Certified/QS9000 RegisteredDual Output Hall Effect Sensor Dual Output Hall Effect Sensor 9900 Series 9900 Series Connector mates with Packard Electric METRI-Pack 1 CONNECTOR PIN OUTPUT 150.2 series (pull-to-seat 6 pin sealed connector SENSOR 1 SENSOR 2 assemblies) (i.e. 12162261, 12162260 or 12162210) Vs (input) F B GROUND E A Shaft flat is shown with: 2 OUTPUT C D sensor 1 output at 50% Vs (input voltage). sensor 2 output at 25% Vs (input voltage). NOTE: All dimensions are shown in millimeters. (Typical Sensor Output) Mechanical Specifications Mechanical Travel -90 to +90 (180 total rotation) Frequency Response 1,000Hz minimum Rotational Torque 0.025 0.110 N-m Weight 35 grams (approx.) Electrical Specifications Mechanical Input Range -45 to +45 (other angles available) Input Voltage 5.0 V 0.25V DC Input Current 10mA maximum per output 20mA maximum total Sensor 1 Output 0.5V - 4.5V Sensor 2 Output 0.25V 2.25V (Different output voltage range for sensor outputs available as a custom option) Accuracy 2.0% of full scale at room temperature 3.0% of full scale over operating temperature range Resolution Analog (continuous) Environmental Specifications Electromagnetic Compatibility 100V/meter, 14kHz 1GHz range Vibration 10G peak, 20 2,000 Hz Shock 50Gs, half sine pulse, 5 m sec duration Side Load 1kg for 1 million cycles Operating temperature range -40C to +85C (wider operating temperature 40 to +150C available as a custom option) Storage temperature range -55C to +105C (-55C to +165C) Specifications subject to change without notice. BE2023 15771 Red Hill Avenue Tustin, CA 92780-7303 (714) 258-7500 Fax: (714) 258-8120 email: sales beiduncan.com ISO9001 Certified/QS9000 Registered