CKM0610 Sensata

Din Rail Mount DataSheet CKM Series Ratings from 10A to 30A 60 VDC Slim 22.5mm (width) package Low Leakage MOSFET Output LED input status indicator DC control DIN Rail and Panel Mount PRODUCT SELECTION Control Voltage 10 A 20 A 30 A 4-32 VDC Control CKM0610 CKM0620 CKM0630 (1) OUTPUT SPECIFICATIONS Description CKM0610 CKM0620 CKM0630 Operating Voltage VDC 0-60 0-60 0-60 Maximum Off-State Leakage Current Rated Voltage mA 0.1 0.1 0.1 Maximum Load Current ADC 10 20 30 Maximum Surge Current (10msec) ADC 30 60 90 Maximum On-State Voltage Drop Rated Current VDC 0.2 0.4 0.5 Maximum On-state Resistance Rated current (RDS-ON) ohms 0.02 0.018 0.016 (1) INPUT SPECIFICATIONS Description Parameters Control Voltage Range 4.0-32 VDC Minimum Turn-On Voltage 4.0 VDC Minimum Turn-Off Voltage 1.0 VDC Maximum Input Current (2) 9 mA 5 VDC, 11 mA 32 VDC Maximum Turn-On Time msec 1.0 Maximum Turn-Off Time msec 1.0 (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 2500Vrms 9 Minimum Insulation Resistance ( 500 V DC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40C to 80C Ambient Storage Temperature Range -40C to 125C Status Indicator Display Green LED Weight (typical) 10 oz. (280g) Encapsulation Thermally Conductive Epoxy Terminals Box Clamp Type Maximum Wire Size: AWG 10 (3mm) Recommended Terminal Screw Torque Range: 5.0-6.0 in lb (0.6-0.7 Nm) Min. Side by Side Spacing 0.8 inch (20mm) GENERAL NOTES 1) All parameters at 25C unless otherwise specied. 2) Input circuitry for incorporates active current limiter. NOTE: Inductive loads should be diode suppressed. Do not forget to visit us at: www.crydom.com Copyright 2019 Crydom Inc. Specifications subject to change without notice.I N P U T S Din Rail Mount DataSheet THERMAL DERATE INFORMATION CKM0630 30 25 CKM0620 20 15 CKM0610 10 5 0 20 40 60 80 Ambient Temperature (C) MECHANICAL SPECIFICATIONS Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches millimeters MOUNTING HOLE/SLOT 0.17 (4.3) DIA. +3/A1 4/A2 CKR SERIES 2.6 3.2 3.5 (66.0) (81.9) (88.9) SOLID STATE CONTACTOR OUTPUT 1/L1 2/T1 .5 (12.7) .890 (22.5) 3.2 (81.3) Current Rating 20A 25C 30 20 10 Caution High Temperature 80 20 40 60 3.9 HEAT SINK: (99.0) BLACK ANODIZED ALUMINUM Do not forget to visit us at: www.crydom.com Copyright 2019 Crydom Inc. Specifications subject to change without notice. T A T U S Output Current (Adc)