CL240A10R Sensata

Panel Mount Datasheet CL Series Ratings from 5 A and 10 A 24-280 VAC AC or DC control Triac Output EMC Compliant to Level 3 LED Status Indicator Epoxy Free Design UL Approved, CE Compliant to EN60950-1 Improved SEMS screw and washer Redesigned housing with anti-rotation barriers For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 5 A 10 A 3-32 VDC CL240D05 CL240D10 90-250 VAC CL240A05 CL240A10 AVAILABLE OPTIONS Termination Blank: Screws & clamps Control Voltage K: Installed standoffs with Cover A: 90-250 VAC screws for PC Board Blank: Not Included (IP00) Series D: 3-32 VDC mounting (IP00 only) (1) C: Included (IP20) K CL 240 A 10 R C H Load Voltage Rated Load Current Switching Type Thermal Pad 240: 24-280 VAC 05: 5 Amps Blank: Zero Voltage Blank: Not Included 10: 10 Amps Turn-On H: Included Required for valid part number R: Instantaneous Turn-On For options only and not required for valid part number Not all part number combinations are available. * Contact Crydom Technical Support for information on the availability of a specific part number. (2) OUTPUT SPECIFICATIONS Description 5 A 10 A Operating Voltage (47-63Hz) Vrms 24-280 24-280 Transient Overvoltage Vpk (3) 600 600 Maximum Off-State Leakage Current Rated Voltage mArms 7 7 Minimum Off-State dv/dt Maximum Rated Voltage V/sec 500 500 Maximum Load Current Arms (4) 5 10 Minimum Load Current mArms 150 150 Maximum 1 Cycle Surge Current (50/60Hz) Apk 84/100 120/126 Maximum On-State Voltage Drop Rated Current Vpk 1.6 1.5 Thermal Resistance Junction to Case (Rjc) C/W 2.3 2.3 Maximum 1/2 Cycle I t for Fusing (50/60Hz) Asec 35/42 72/66 Minimum Power Factor (with Maximum Load) 0.5 0.5 Minimum Heat Sink for Rated Current 40C C/W 3 1.5 (2) INPUT SPECIFICATIONS Description DC Control AC Control Control Voltage Range 3-32 VDC (5) 90-250 VAC Maximum Reverse Voltage -32 VDC - Minimum Turn-On Voltage 3 VDC 90 VAC Must Turn-Off Voltage 1 VDC 10 VAC Minimum Input Current (for on-state) 10 mA 6 mA Maximum Input Current 14 mA 10 mA Nominal Input Impedance Current Limited Current Limited Maximum Turn-On Time msec 1/2 Cycle (6) 20 Maximum Turn-Off Time msec 1/2 Cycle 30 Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.Panel Mount Datasheet (2) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input to Output (50/60Hz) 4000 Vrms Dielectric Strength, Input/Output to Ground (50/60Hz) 2500 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range (7) -40 to 80 C Ambient Storage Temperature Range -40 to 125 C Weight (typical) 2.88 oz (81.53 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 Input/Load Terminal Screw Torque Range (in-lb/Nm) (1) w/K option 8-10 / 0.9-1.13 Input/Output Terminal Screw Thread Size 6-32 UNC / 8-32 UNC Humidity per IEC60068-2-78 93% non-condensing LED Input Status Indicator Green 11,641,553 hours (1,328 years) MTBF (Mean Time Between Failures) at 40C ambient temperature (8) 7,210,376 hours (823 years) MTBF (Mean Time Between Failures) at 60C ambient temperature (8) WIRING DIAGRAM AC V Load (9) Recommended Wire Sizes Wire Size Wire Pull-Out Terminals 1 ( ) 2 ( ) (Solid / Stranded) Strength (lbs) N 2 24 AWG (0.2 mm ) / 0.2 minimum 10 44.5 Input 2 2 x 12 AWG (3.3 mm ) / 3.3 maximum 90 400 2 1 OUTPUT S OL I D S T A T E R EL A Y 2 20 AWG (0.5 mm ) / 0.518 minimum 30 133 Output 2 4 2 x 10 AWG (5.3 mm ) / 5.3 110 490 INPUT 3 2 2 x 8 AWG (8.4 mm ) / 8.4 maximum 90 400 4 ( / ) 3 (+ / ) Input Current vs Input Voltage Standard Regulated DC Inputs EQUIVALENT CIRCUIT BLOCK DIAGRAMS 14 12 CL Series DC Control 10 8 4 1 -DC AC 6 Trigger 4 Circuit 2 0 +DC 3 2 AC 0 5 10 15 20 25 30 35 Current Limiter DC Input Voltage Input Current vs Input Voltage Standar Regulated AC Inputs CL Series AC Control 7 Current 6 Limiter 4 1 5 AC AC 4 AC/DC Trigger 3 Converter Circuit 2 AC 3 2 AC 1 0 0 50 100 150 200 250 AC Input Voltage Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice. INPUT INPUT OUTPUT OUTPUT Input Current (mA) Input Current (mA)