CMRD2465 Sensata

DIN Rail MouDIN Rail Mounntt DataSheetDataSheet CMR24 Series Ratings from 35 A to 65 A 660 VAC 45mm (width) package SCR output for heavy industrial loads LED input status indicator AC or DC control Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 35 A 45A 55A 65A 3-32 VDC CMRD2465 CMRD2435 CMRD2445 CMRD2455 90-140 VAC CMRA2435 CMRA2445 CMRA2455 CMRA24065 18-36 VAC CMRA2435E CMRA2445E CMRA2455E CMRA2465E AVAILABLE OPTIONS Operational Current 35: 35 Amps 45: 45 Amps 55: 55 Amps 65: 65 Amps Control Voltage Overvoltage Protection D: 3-32 VDC Blank: No Included Series A: 90-140 VAC P: Included A 24 35 E P -10 CMR Input Range Switching Mode Operating Voltage Blank: Standard Input Blank: Zero Voltage Turn-on 24: 24-280 VAC E: 18-36 VAC -10: Random Turn-On Required for valid part number For options only and not required for valid part number (1) OUTPUT SPECIFICATIONS Description 35 A 45 A 55 A 65 A Operating Voltage (47-63Hz) Vrms 24-280 24-280 24-280 24-280 Transient Overvoltage Vpk 600 600 600 600 Maximum Off-State Leakage Current Rated Voltage mArms 10 10 10 10 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (2) 500 500 500 500 35 45 55 65 Maximum Load Current Arms 0.15 0.15 0.25 0.25 Minimum Load Current Arms Maximum Surge Current (50/60Hz, 1 Cycle) Apk 239/250 597/625 954/1000 1145/1200 1.6 1.6 1.6 1.6 Maximum On-State Voltage Drop Rated Current Vpk Thermal Resistance Junction to Case (Rjc) C/W 1.02 0.63 0.31 0.28 285/259 1779/1621 4555/4150 4555/4150 Maximum I t for Fusing (50/60Hz, 1/2 cycle) A sec Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 0.5 FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.DIN Rail Mount DataSheet (1) INPUT SPECIFICATIONS Description CMRD24xx CMRA24xx Control Voltage Range (DC or RMS) 3-32 VDC 90-140 Vrms Minimum Turn-On Voltage 3.0 VDC 90 Vrms Maximum Turn-Off Voltage 1.0 VDC 10 Vrms - Maximum Reverse Voltage 32 VDC Maximum Off-State Voltage 1.0 VDC 10 VAC 30 mA Maximum Input Current - Typical Input Current (4) 17 mA 5 VDC 15 mA 120 Vrms Maximum Turn-On Time msec (3) 1/2 Cycle 10 1/2 Cycle Maximum Turn-Off Time msec 40 GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 V DC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40C to 80C Ambient Storage Temperature Range -40C to 125C Status Indicating Display Green LED Weight (typical) 16.8 oz. (476g) Encapsulation Thermally conductive Epoxy Terminals Cage type Maximum Wire Size: Output: AWG 8 (4.8mm) Input: AWG 12(2.5mm) Recommended Terminal Screw Torque Range: Output:10-15 in lb (1.1-1.7 Nm) Input: 5-6 in lb (0.6-0.7 Nm) GENERAL NOTES 1) All parameters at 25C unless otherwise specied. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Turn-on time for DC control random turn-on versions is 0.02 msec 4) Input circuitry version incorporates active current limiter. Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.