D1225-10 Sensata

Panel Mount Datasheet Series 1 120 VAC Ratings from 10A to 40A 24-140 VAC AC or DC control SCR output for heavy industrial loads Direct bond copper substrate Zero voltage or instantaneous turn-on outputs EMC compliant to Level 3 UL/CSA/TUV Approved, CE Compliant to EN60950-1 Direct power lead frame Improved SEMS screw and washer Epoxy free design Redesigned housing with anti-rotation barriers For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 10A 25A 40A 3-32 VDC D1210 D1225 D1240 90-280 VAC A1210 A1225 A1240 18-36 VAC A1210E A1225E A1240E AVAILABLE OPTIONS Control Voltage A: 90-280 VAC Overvoltage Protection Snubber Switching Type D: 3-32 VDC Blank: Not Included Blank: Not Included Blank: Zero Voltage Turn-On AxxxxE: 18-36 VAC (3) (4) P: Included S: Included -10: Instantaneous Turn-On A E K P G S H -10 12 10 Operating Rated Load Current Termination Input Status LED Thermal Pad Voltage 10: 10 Amps Blank: Screw Blank: Not Included Blank: Not Included (1) 12: 24-140 VAC 25: 25 Amps F: Quick Connect G: Included H: Included 40: 40 Amps (Up to 50 Amps only) K: Hex standoffs (2) Required for valid part number For options only and not required for valid part number * Not all part number combinations are available. Contact Crydom Technical support for information on the availability of a specific part number. (5) OUTPUT SPECIFICATIONS Description 10A 25A 40A Operating Voltage (47-440Hz) Vrms (6) 24-140 24-140 24-140 Transient Overvoltage Vpk 600 600 600 Maximum Off-State Leakage Current Rated Voltage mArms (7) 1 1 1 Minimum Off-State dv/dt Maximum Rated Voltage V/sec 500 500 500 Maximum Load Current Arms (2)(8) 10 25 40 Minimum Load Current mArms 150 150 150 Maximum 1 Cycle Surge Current (50/60Hz) Apk 115/120 239/250 597/625 Maximum On-State Voltage Drop Rated Current Vrms 1.15 1.15 1.15 Thermal Resistance Junction to Case (Rjc) C/W 1.03 0.8 0.5 Maximum 1/2 Cycle I t for Fusing (50/60Hz) A sec 66/60 285/259 1770/1629 Minimum Power Factor (at Maximum Load) (3) 0.5 0.5 0.5 (5) INPUT SPECIFICATIONS Description D12xx A12xx A12xxE Control Voltage Range 3-32 VDC 90-280 Vrms 18-36 Vrms Maximum Reverse Voltage -32 VDC - - Minimum Turn-On Voltage 3.0 VDC (9) 90 Vrms 18 Vrms Must Turn-Off Voltage 1.0 VDC 10 Vrms 4 Vrms Minimum Input Current mA 7 5 16 Maximum Input Current mA 12 10 20 Nominal Input Impedance Ohms Current Regulated Maximum Turn-On Time msec 1/2 Cycle (10) 20 20 Maximum Turn-Off Time msec 1/2 Cycle 30 30 FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2021 Crydom Inc. Specifications subject to change without notice.Panel Mount Datasheet (5) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80 C Ambient Storage Temperature Range -40 to 125 C Weight (typical) 2.6 oz (74.9g) Housing Material UL 94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2.0-2.2 18-20 / 2.0-2.2 SSR Mounting Screw Torque Range (in-lb/Nm) Input/Load Terminal Screw Torque Range (in-lb/Nm) (2) w/K option 8-10 / 0.9-1.13 Input/Output Terminal Screw Thread Size 6-32 UNC / 8-32 UNC Humidity per IEC60068-2-78 93% non-condensing LED Input Status Indicator w/G option (green) 11,641,553 hours (1,328 years) MTBF (Mean Time Between Failures) at 40C ambient temperature (11) 7,210,376 hours (823 years) MTBF (Mean Time Between Failures) at 60C ambient temperature (11) WIRING DIAGRAM AC Input Current vs Input Voltage Recommended Wire Sizes V Standard Regulated DC Input Wire Size Wire Pull-Out 25 Terminals (12) (Solid / Stranded) Strength (lb) N Load 20 2 24 AWG (0.2 mm ) / 0.2 minimum 10 44.5 Input 1 ( ) 2 ( ) 2 15 2 x 12 AWG (3.3 mm ) / 3.3 maximum 90 400 2 10 20 AWG (0.5 mm ) / 0.518 minimum 30 133 Output 2 2 x 10 AWG (5.3 mm ) / 5.3 1 OUTPUT 2 110 490 5 S OL I D S T A T E R EL A Y 2 2 x 8 AWG (8.4 mm ) / 8.4 maximum 90 400 0 0 5 10 15 20 25 30 4 INPUT 3 DC Input Voltage 4 ( / ) 3 (+ / ) EQUIVALENT CIRCUIT BLOCK DIAGRAMS Diagram: Series 1 AC control Diagram: Series 1 DC control 4 1 4 1 AC AC -DC AC Current (14) (14) Limiter (13) AC/DC Trigger Trigger Converter Circuit Circuit (15) (15) (13) AC 3 2 AC +DC 3 2 AC Current Limiter Do not forget to visit us at: www.crydom.com Copyright 2021 Crydom Inc. Specifications subject to change without notice. Input Current (mA)