D2W203F Sensata

PCB Mount DataSheet D2W Series SIP SSR Ratings to 3.5 A 280 VAC DC control Zero-crossing (resistive loads) output Internal snubber network PRODUCT SELECTION Control Voltage 2 A 3 A 3.5 A 3-32 VDC D2W202F D2W203F D2W203F-11 (1) OUTPUT SPECIFICATIONS Description 2 A 3 A 3.5 A Operating Voltage (47-63Hz) Vrms 24-280 24-280 24-280 Transient Overvoltage Vpk 600 600 600 Maximum Off-State Leakage Current Rated Voltage mA 8 8 8 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (3) 200 200 200 Maximum Load Current Arms 2 3 3.5 Minimum Load Current Arms 0.06 0.06 0.06 Maximum Surge Current (16.6ms) Apk 28 70 80 Maximum On-State Voltage Drop Rated Current Vpk 1.4 1.4 1.4 Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 (1) INPUT SPECIFICATIONS Description Parameters Control Voltage Range 3.5-32 VDC Must Turn On Voltage 3.0 VDC Must Turn On Voltage 1.0 VDC Typical Input Current 5 VDC 3.0 mA Nominal Input Impedance 1500 Ohm Maximum Turn-On Time msec 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) (2) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) (2) 10 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -30 to 80C Ambient Storage Temperature Range -30 to 125C Weight (typical) 0.6 oz. (17g) Encapsulation Thermally Conductive Epoxy GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) Dielectric and insulation resistance are measured between input and output (3) Off-State dv/dt test method per EIA/NARM standard RS FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.PCB Mount DataSheet MECHANICAL SPECIFICATIONS Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches millimeters .47 MAX PIN 1: AC LOAD 11.9 PIN 2: AC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL 1.18 Max 29.9 LOAD CONTROL .39 TYP. 9.9 4 3 2 1 .100 TYP200 .12 2.5 5.1 3.0 .700 17.8 1.100 29.7 .040 1.0 DIA 1.70 ( 4 PLACES) MAX 43.1 THERMAL DERATE INFORMATION D2W203F D2W203F-11 D2W202F 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 20 40 60 80 Ambient Temperature (C) Max. Load Current vs. Temp. AGENCY APPROVALS AGENCY APPROVALS UL E116950 CSA LR81689 Rev. 081020 ECN 20958 Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice. Load Current (Amps)