D53RV25CH Sensata

53RV Series Three-phase Motor Reversing solid-state relay Ratings from 25A and 50A per phase 48-530 VAC Interlock Circuit Prevents Inadvertent Actuation of Both Directions SCR output for heavy industrial loads DC control LED input status indicator PRODUCT SELECTION Control Voltage 25A 50A 4-32 VDC D53RV25C D53RV50C AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description D53RV25C D53RV50C Operating Voltage (47-63Hz) Vrms 48-530 48-530 Maximum Load Current Arms (2) 25 50 Transient Overvoltage Vpk 1100 1100 Maximum Off-State Leakage Current Rated Voltage mArms (3) 6 6 Minimum Load Current Arms 0.1 0.1 Maximum Surge Current 50/60 Hz (16.6ms) Apk 475/500 710/750 1 Second Surge Current 50/60 Hz Apk 100 150 Maximum On-State Voltage Drop Rated Current Vpk 1.35 1.35 Maximum IT for Fusing (50/60 Hz, 1/2 cycle) A sec 1139/1038 2520/2320 Thermal Resistance Junction to Case (Rjc) C/W 0.26 0.25 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (4) 500 500 UL/IEC 60947 Motor Control Ratings at 120V HP/KW (5) 0.75/0.56 1.5/1.11 UL/IEC 60947 Motor Control Ratings at 240V HP/KW (5) 1/0.74 3/2.22 UL/IEC 60947 Motor Control Ratings at 380V HP/KW (5) 2/1.48 5/3.7 UL/IEC 60947 Motor Control Ratings at 480V HP/KW (5) 3/2.22 7.5/5.55INPUT SPECIFICATIONS (1) Description Parameters Control Voltage Range 4-32 VDC Minimum Turn-On Voltage 4.0 VDC Minimum Turn-Off Voltage 1.0 VDC Minimum Input Current (for on-state) 23mA Maximum Input Current 35mA Input Resistance Current Regulated Maximum Turn-On Time msec 150 Maximum Turn-Off Time msec 1/2 Cycle Interlocking Time msec 100 GENERAL SPECIFICATIONS Description Parameters Input to Output Isolation 4000 Vrms Input/ Output to Ground Isolation 2500 Vrms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80C Ambient Storage Temperature Range -40 to 100 C Weight (typical) 13.1 oz (370g) Housing Material UL 94V0 (self extinguishing Terminals Mounted Input Terminal Screw Torque Range: in lbs/Nm 16.8/1.9 Output Terminal Screw Torque Range: in lbs/Nm 21.2/2.4 GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) When mounted to the proper size heat sink (see derating curves) 3) Measured between 1/L1 and 2/T1 or 3/L2 and 4/T2 4) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 5) At 40C Ambient temperature. THERMAL DERATE INFORMATION