DP4RSB60E20B Sensata

Control Relays DataSheet DP Series DC Reversing Solid State Contactor Ratings of 20, 40 & 60 Amps Load voltage ratings of 1-48 VDC Optional Soft Start w/Brake, Soft Start/Soft Stop no Brake LED input status indicator. Green (Forward), Yellow (Reverse) DC control cULus Recognized, IEC Rated, CE & RoHS Compliant PRODUCT SELECTION Control Voltage 20 A 40 A 60 A 4-15 VDC DP4R60D20 DP4R60D40 DP4R60D60 18-32 VDC DP4R60E20 DP4R60E40 DP4R60E60 AVAILABLE OPTIONS Start Mode Blank: Start Stop Mode SA: Soft Start/Ramp Blank: Stop Mode matches Start Mode Up, 0.2 sec B2: Dynamic Brake, 0.2 sec SB: Soft Start/Ramp B5: Dynamic Brake, 0.5 sec Control Voltage: Up, 0.5 sec B8: Dynamic Brake, 0.2 sec D: 4.5-15 VDC SC: Soft Start/Ramp B: Dynamic Brake, Continuous Series E: 18-32 VDC Up, 1 sec 40 4R 60 D B H DP SB Function Thermal Pad Rated Operating Voltage Operating Current 4R: 4 Channel DC Blank: Not Included 60: 1-48 VDC 20: 20 Amps Reversing H: Included 40: 40 Amps 60: 60 Amps Required for valid part number For options only and not required for valid part number (1) OUTPUT SPECIFICATIONS Description 20 A 40 A 60 A Operating Voltage VDC 1-48 1-48 1-48 60 UL 508 Resistive Load, IEC 60947-4-1 DC-1 Adc 20 40 UL 508 Motor Controller, IEC 60947-4-1 DC-3 FLA 13 15 14 Minimum Load Current A 0.10 0.10 0.10 240 Maximum Surge Current (10ms) Adc 80 140 Maximum Off-State Leakage Current Rated Voltage A 20 20 20 Maximum On-State Voltage Drop Rated Current Vdc 0.28 0.30 0.28 0.13 Combined Thermal Resistance Junction to Case (Rjc) C/W 0.40 0.20 Maximum On-State Resistance, per switch, (RDS-ON) Ohms 0.005 0.014 0.007 Total Power Dissipation per module, 2 switches conducting, Tj=100 C Watts 20 60 40 Internal PWM For Soft Start/Stop Ve rsions Duty Cycle 10-100% Hz 200 200 200 1/4-20 Hex Output Terminal Screw size 10-32 Combo Head 1/4-20 Hex Screw Torque Range in lbs/Nm 15-20 / 1.7-2.3 20-25 / 2.3-2.8 20-25 / 2.3-2.8 Maximum Wire Size 10 AWG 6 AWG 8 AWG 10.9 oz (310g) 12.2 oz (345g) Weight (typical) 12.2 oz (345g) FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.Control Relays DataSheet (1) INPUT SPECIFICATIONS Description DR4R60Exx DR4R60Dxx Logic Supply Voltage Range VDC 4.5-15 18-32 Minimum Logic Supply Current mA (2) 16 20 Maximum Logic Supply Current mA (2) 20 25 Control Voltage Range VDC 4.5-15 18-32 Minimum Control Input Current Min voltage mA 0.20 1.0 Maximum Control Input Current Max voltage mA 1.0 2.0 Typical Interlocking Time msec 200 200 Mating Connector (Not Supplied) Molex 50579404 or Equivalent Molex 50579404 or Equivalent GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 2500 Vrms 9 10 Ohm Minimum Insulation Resistance ( 500 VDC) Maximum Capacitance, Input to Output (pF) 10 pF Ambient Operating Temperature Range -30 to 80C Ambient Storage Temperature Range -40 to 125 C Housing Material Valox 420 SEO Black, UL 94 V-0 Encapsulation Thermally conductive Epoxy GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) Input circuit incorporates active current limiter. WIRING DIAGRAM + DC Load Voltage 2 / + 5/+VCC H-Bridge - DC Load Voltage 2/+ 1 / - 6/GND S1R S2F Isolation Control Circuit Circuit 4 3 7/+FWD 3 / L1 S3F S4R 8/+REV DC Load 4 / L2 Status Functions Green LED (Forward) Yellow LED (Reverse) Initial Logic Voltage On Flash Twice Flash Twice ON OFF Forward ON Reverse ON OFF ON Flash Once Flash Once Dynamic Brake Flash 3x Intermittently Interlocking Flash 3x Intermittently Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.