DR2260A35UR Sensata

DIN Rail Mount Datasheet DR22 Series AC Output DIN Rail Mount SSRs Output ratings up to 35 Amps at 600 VAC Built-in overvoltage protection Relay or Contactor configuration Integral heat sink eliminates the need for complex thermal calculations DBC substrate for superior thermal performance Elevato screw option to allow the use of ring or lug type terminals IP20 touch-safe housing AC or DC control C-UL-US and TUV approved PRODUCT SELECTION Control Voltage 20A 30A 35A 90-280 VAC/VDC DR2260A20x DR2260A30x DR2260A35x 4-32 VDC DR2260D20x DR2260D30x DR2260D35x AVAILABLE OPTIONS Rated Load Current Switching Type 20: 20 Amps Blank: Zero Voltage Turn-On 30: 30 Amps Operating Voltage R: Instantaneous Turn-On 2 Series 60: 48-600 VAC 35: 35 Amps High I t (Motor Rating Certified) DR22 60 A 20 UV R J Control Voltage (1) Terminal Layout Input Connector A: 90-280 VAC/VDC U: Relay Configuration Blank: Screw Terminal D: 4-32 VDC V: Contactor Configuration J: Spring Terminal (std. screw) (V and W suffixes only) Required for valid part number W: Contactor Configuration For options only and not required for valid part number (elevator screw) (2) OUTPUT SPECIFICATIONS Description 20A 30A 35A Operating Voltage (47-440Hz) VRMS 48-600 48-600 48-600 Transient Overvoltage Vpk (3) 1200 1200 1200 Maximum Off-State Leakage Current Rated Voltage mARMS 1 1 1 Minimum Off-State dV/dt Maximum Rated Voltage V/sec 500 500 500 Load Current, General Use UL508/LC A IEC62314 40C ARMS 20 30 35 Load Current, Motor Starting UL508 FLA/LC B IEC62314 40C ARMS 8.5/4.8 14/7.6 26/14 Minimum Load Current mARMS 100 100 150 Maximum 1 Cycle Surge Current (50/60Hz) Apk 286/300 716/750 1290/1350 Maximum On-State Voltage Drop Rated Current Vpk 1.35 1.35 1.3 Maximum 1/2 Cycle I t for Fusing (50/60Hz) A sec 409/375 2563/2343 8320/7593 Minimum Power Factor (at Maximum Load) (4) 0.5 0.5 0.5 Motor Rating UL 508/IEC62314 HP (kW) : 120 VAC 0.5 (0.37) 1 (0.74) 2 (1.5) Motor Rating UL 508/IEC62314 HP (kW) : 240 VAC 1.5 (1.1) 3 (2.2) 5 (3.73) Motor Rating UL 508/IEC62314 HP (kW) : 480 VAC 3 (2.24) 5 (3.7) 10 (7.4) (2) INPUT SPECIFICATIONS Description DR2260Dxxx DR2260Axxx Control Voltage Range 4-32 VDC (5) 90-280 VAC/VDC (6) Maximum Reverse Voltage -32 VDC - Minimum Turn-On Voltage 4 VDC 90 VAC/VDC Must Turn-Off Voltage 1 VDC 5 VAC/VDC Minimum Input Current (for on-state) 7 mA 6 mA Maximum Input Current 15 mA 10 mA Nominal Input Impedance Current Limited Current Limited Maximum Turn-On Time msec 1/2 Cycle (7) 20 Maximum Turn-Off Time msec 1/2 Cycle 30 Do not forget to visit us at: www.crydom.com Copyright 2019 Crydom Inc. Specifications subject to change without notice.DIN Rail Mount Datasheet (2) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input to Output (50/60Hz) 4000 VRMS Dielectric Strength, Input/Output to Case (50/60Hz) 4000 VRMS 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range (8) -40 to 80 C Ambient Storage Temperature Range -40 to 100 C Short Circuit Current Rating (9) 100kA Weight (typical) Option U 10.5 oz (298 g), Option V,W 10.6 oz (301 g) Housing Material UL94 V-0 Heat Sink Material Aluminum Din Rail Clip Material Zink Plated Steel Hardware Finish Nickel Plating Input Terminal Screw Torque Range (lb-in/Nm) Option U 13-15/1.5-1.7, Option V,W 5/0.5 (10) Load Terminal Screw Torque Range (lb-in/Nm) Option U 13-15/1.5-1.7, Option V,W 18-20/2-2.2 Humidity 95% non-condensing LED Input Status Indicator Green INPUT CURRENT INFORMATION 4-32 VDC Input 90-280 VAC/VDC Input 7 14 12 6 10 5 8 4 6 3 4 2 2 1 0 0 0 5 10 15 20 25 30 35 0 40 80 120 160 200 240 280 Input Voltage (VDC) Input Voltage (VAC/VDC) SURGE CURRENT INFORMATION DR2260x20x DR2260x30x 300 700 600 250 500 200 400 150 300 100 200 50 100 0 0 0.01 0.1 1 10 0.01 0.1 1 10 DR2260x35x 1400 1200 1000 800 Single Pulse (11) 600 400 200 0 0.01 0.1 1 10 Do not forget to visit us at: www.crydom.com Copyright 2019 Crydom Inc. Specifications subject to change without notice. Surge Duration (sec) Surge Duration (sec) Surge Duration (sec) Surge Current (Amp) AC Peak Surge Current (Amp) AC Peak Input Current (mA) Input Current (mA) Surge Current (Amp) AC Peak