DR4560D45P Sensata

DR45 SERIES AC SINGLE PHASE OUTPUT DIN RAIL MOUNT SSRS Introduction The DR45 is a powerful and compact solid state relay in a DIN rail 45mm wide package with an output rating up to 60 Amps 40C offering mounting exibility (on panel or DIN rail) and convenient input connection options. Its high It capability and optional built-in overvoltage protection make it suitable for demanding heating, motion and lighting applications. Its contactor conguration and large cage clamp terminals allow connecting wires up to 3 AWG size on the output without the use of any additional accessories making them truly ready-to-use devices, therefore reducing installation cost and time. UL Listed and VDE certied, the DR45 is a safe and versatile solid state relay with superior performance when compared to previous generation and competitor products in similar sized packages. Features Output ratings up to 60 Amps at 600 VAC Built-in overvoltage protection Integral heat sink eliminates the need for complex thermal calculations Cage clamp terminal type accept up to 3 AWG wire size IP20 touch-safe housing Contactor conguration AC or DC control C-UL-US Listed and VDE approved Applications Plastic injection molding equipment Packaging equipment Industrial ovens Lighting control Pump control Conveyor drives HVAC&R Railway vehicles PRODUCT SELECTION Control Voltage 45A 60A 90-280 VAC/VDC DR4560A45x DR4560A60x 4-32 VDC DR4560D45x DR4560D60x Page 1 Copyright 2019 Sensata Technologies, Inc. www.sensata.comORDERING OPTIONS DR45 60 A 45 R P J Series DR45 Operating Voltage 60: 48-600 VAC Control Voltage (1) A: 90-280 VAC/VDC D: 4-32 VDC Rated Load Current 45: 45 Amps 60: 60 Amps Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On (Motor Rating Certied) Overvoltage Protection Blank: Not Included P: Included Input Connector Required for valid part number Blank: Screw Terminal J: Spring Terminal For options only and not required for valid part number (2) OUTPUT SPECIFICATIONS Description 45A 60A Operating Voltage (47-440Hz) VRMS 48-600 48-600 Transient Overvoltage Vpk (3) 1200 1200 Maximum Off-State Leakage Current Rated Voltage mARMS 1 1 Minimum Off-State dV/dt Maximum Rated Voltage V/sec 500 500 Load Current, General Use UL508/LC A IEC62314 40C ARMS 45 60 Load Current, Motor Starting UL508 FLA/LC B IEC62314 40C ARMS 14/7.6 26/14 Minimum Load Current mARMS 100 150 Maximum 1 Cycle Surge Current (50/60Hz) Apk 716/750 1290/1350 Maximum On-State Voltage Drop Rated Current VRMS 1.25 1.15 Maximum 1/2 Cycle I t for Fusing (50/60Hz) A sec 2563/2343 8320/7593 Maximum Power Dissipation Rated Current W 52 69 Minimum Power Factor (at Maximum Load) (4) 0.5 0.5 Motor Rating UL 508/IEC62314 HP (kW) : 120 VAC 1 (0.74) 2 (1.5) Motor Rating UL 508/IEC62314 HP (kW) : 240 VAC 3 (2.2) 5 (3.73) Motor Rating UL 508/IEC62314 HP (kW) : 480 VAC 5 (3.7) 10 (7.4) (2) INPUT SPECIFICATIONS Description DR4560Dxxx DR4560Axxx Control Voltage Range 4-32 VDC (5) 90-280 VAC/VDC Maximum Reverse Voltage -32 VDC - Minimum Turn-On Voltage 4 VDC 90 VAC/VDC Must Turn-Off Voltage 1 VDC 5 VAC/VDC Minimum Input Current (for on-state) 7 mA 3 mA Maximum Input Current 15 mA 4 mA Nominal Input Impedance Current Limited Switch Mode Maximum Turn-On Time msec 1/2 Cycle (6) 20 Maximum Turn-Off Time msec 1/2 Cycle 30 Page 2 Copyright 2019 Sensata Technologies, Inc. www.sensata.com