HAC1 Sensata

3RHP Series DC Control 100K-cycle UL508 Endurance Rating for Enhanced Reliability 40 and 50A output Voltage ratings to 240 VAC Lifetime 2 million operations at full load LED input status indicator Wire, lug or quick connect termination Industry Standard DP contactor mounting PRODUCT SELECTION (by control voltage and output rating) Control Voltage 40A 120 VAC 50A 120 VAC 40A 240 VAC 50A 240 VAC 4.5-5.5 VDC 3RHP1240D5 3RHP1250D5 3RHP2440D5 3RHP2450D5 10-15 VDC 3RHP1240D12 3RHP1250D12 3RHP2440D12 3RHP2450D12 22-27 VDC 3RHP1240D24 3RHP1250D24 3RHP2440D24 3RHP2450D24 OUTPUT SPECIFICATIONS (voltage) Description 120 VAC 240 VAC Operating Voltage (47-63Hz) Vrms 100-120 208-240 Maximum Off-State Leakage Current per channel 0.05 mA 120 VAC 0.06 mA 240 VAC OUTPUT SPECIFICATIONS (current) Description 40A 50A Maximum Load Current per phase 40C Arms (1) 40A Resistive 50A Resistive Power terminals 1/4 Quick Connect and 10x32 binder 1/4 Quick Connect and box lugs head screws Wire Size 8-14 AWG 6-14 AWG INPUT SPECIFICATIONS Description SUFIX D5 SUFIX D12 SUFIX D24 Coil Voltage 4.5-5.5 VDC 10-15 VDC 22-27 VDC Max. Reverse Voltage -5.5 VDC -15.5 VDC -27.5 VDC Input Current 12mA 5 VDC 12mA 12 VDC 12mA 24 VDC Min. Turn-On Voltage 4.5 VDC 9.5 VDC 9.5 VDC Min. Turn-Off Voltage 1 VDC 2 VDC 2 VDC GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input to Output 4000 Vrms Dielectric Strength, Input/Output to ground 2500 Vrms Contacts (2) Three Normally Open Ambient Operating Temperature Range (3) -20 to 75 C Ambient Storage Temperature Range -40 to 100 C Max. Turn-On Time 50/60 Hz 20 ms / 16.6 ms Max. Turn-Off Time 50/60Hz 40 ms / 32 ms Maximum Number of Operations 30 per Minute Lifetime Number of Operations Rated Current (4) > 2 Million Weight (typical) 1.19 lbs (540 g) Screw Torque (input/Output) 40A 4.4-5 in lb (0.5-0.6 Nm) / 15-18 in lb (1.7-2.1 Nm) Screw Torque (input/Output) 50A 4.4-5 in lb (0.5-0.6 Nm) / 20-25 in lb (2.2-2.9 Nm) ObsoleteGENERAL NOTES (1) See Derating curves for additional operating conditions. (2) The RHP includes a Solid State Relay, therefore electrical isolation is not provided. (3) The RHP includes over temperature protection for the solid state relay. (4) 40C ambient temperature, 30 operations/min, maximum voltage control. MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION Obsolete