HS072-HD6090 Sensata

Panel Mount DataSheet HS072 Series Assemblies 65 amp AC output 40C Single Channel output 3 to 32 VDC input control voltage Panel mounted uL, CSA, VDE, CE approved SSRs PRODUCT SELECTION 65 A Description 65 A 3-32 VDC Control HS072-D2490 HS072-HD6090 (1) OUTPUT SPECIFICATIONS Description HS072-D2490 HS072-HD6090 24-280 Operating Voltage (47-63Hz) Vrms 48-660 600 Transient Overvoltage Vpk 1200 Maximum Off-State Leakage Current Rated Voltage mArms 10 5 500 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (2) 500 65 Maximum Load Current Arms 65 Minimum Load Current Arms 0.04 0.04 Maximum Surge Current (16.6ms) Apk 1200 1200 1.6 Maximum On-State Voltage Drop Rated Current Vpk 1.7 Maximum It for Fusing (8.3 msec) A sec 6000 6000 Minimum Power Factor (with Maximum Load) 0.5 0.5 (1) INPUT SPECIFICATIONS Description HS201DR-D2450HS072-D2490 HS072-HD6090 Control Voltage Range 3-32 VDC 3-32 VDC Minimum Turn-On Voltage 3.0 VDC 3.0 VDC Minimum Turn-Off Voltage 1.0 VDC 1.0 VDC Maximum Reverse Voltage 32 VDC 32 VDC Typical Input Current 3.4 mA 5 VDC 2.0 mA (3) Nominal Input Impeadance 1500 Ohms See Note (3) Maximum Turn-On Time msec 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 V DC) 10 Ohm Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80C Ambient Storage Temperature Range -40 to 125C Status Indicator Display None Weight (typical) 1.35 lb. (612g) Encapsulation Themally Conductive Epoxy Recommended Terminal Screw Torque Range: 6-32 Screws - 10 in/lbs. 8-32 Screws - 20 in/lbs. (Screws dry without grease) Thermal pad installed Yes GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 (3) Input circuitry for DC control version incorporates active current limiter (HD model only) Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.Panel Mount DataSheet THERMAL DERATE INFORMATION HS072 w/90A SSR 70 60 50 40 30 20 10 0 20 30 40 50 60 70 80 Ambient Temperature (C) MECHANICAL SPECIFICATIONS Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches millimeters 4.19 106.4 4.19 106.4 1.88 47.7 6X 8-32 UNC-2B 6X 8-32 UNC-2B TAP .33 TAP .33 4.75 4.75 120.7 120.7 2.38 60.3 2.38 60.3 2.54 64.4 5.50 139.7 1.81 46.0 0.66 16.8 2.63 66.8 4.47 113.5 4X 0.21 5.2 4.50 114.3 Agency Approvals Designed in accordance with the requirements of IEC 62314 Agency approvals are for relay only. 10143 UG (D2490, HD6090) LR81689 (all) E116949 (D2490) E116950 (HD6090) Rev. 120111 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice. Load Current (Amps)