HS251-D4850 Sensata

Panel Mount DataSheet HS251 Series Assemblies 28 amp AC output 40C Single Channel output 3 to 32 VDC input control voltage Panel mounted uL, CSA, VDE, CE approved SSRs Epoxy free design PRODUCT SELECTION Description 28A 28A 3-32 VDC Control HS251-D2450 HS251-HD6050 (1) OUTPUT SPECIFICATIONS Description HS251-D2450 HS251-HD6050 Operating Voltage (47-63Hz) Vrms 24-280 48-660 Transient Overvoltage Vpk 600 1200 Maximum Off-State Leakage Current Rated Voltage mArms 1.0 1.0 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (2) 500 500 Maximum Load Current Arms 28 28 Minimum Load Current Arms 150 150 Maximum Surge Current (16.6ms) Apk 625 1200 Maximum On-State Voltage Drop Rated Current Vac 1.15 1.15 Maximum It for Fusing (8.3 msec) A sec 1620 1620 Minimum Power Factor (with Maximum Load) 0.5 0.5 (1) INPUT SPECIFICATIONS Description HS251-D2450 HS251-HD6050 Control Voltage Range 3-32 VDC 4-32 VDC Minimum Turn-On Voltage 3.0 VDC 4.0 VDC Minimum Turn-Off Voltage 1.0 VDC 1.0 VDC Maximum Reverse Voltage -32 VDC -32 VDC Minimum Input Current 7.0 mA 7.0 mA Maximum Input Current 12 mA 12 mA Nominal Input Impeadance Current Regulated Current Regulated Maximum Turn-On Time msec 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 V DC) 10 Ohm Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80C Ambient Storage Temperature Range -40 to 125C Status Indicator Display None Weight (typical) 0.38 lb (175 g) Recommended Terminal Screw Torque Range: (in-lb/Nm) 6-32 Screws - 13-15/1.5-1.7. 8-32 Screws - 18-20/2-2.2. (Screws dry without grease) Thermal pad installed Yes GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.Panel Mount DataSheet MECHANICAL SPECIFICATIONS 3.00 3.00 2.28 1.70 0.19 2.52 1.60 3.00 THERMAL DERATE INFORMATION HS251 w/50A SSR 30 25 20 15 10 5 0 0 10 20 30 40 50 60 70 80 Ambient Temperature (C) AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 Agency approvals are for relay only. E116949 LR81689 10143 UG (Not Applicable: -B and 4D) Rev. 042414 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice. Load Current (Amps)