IPSL-G0750-5M12 Sensata

IPSL-M12 series Low Range Industrial Pressure Sensor with M12 4Pin Connector Piezo-resistive sensor Stainless steel body & diaphragm Accuracy <0.25% FS BFSL 4-20mA or 0-5Vdc output. Pressure ranges from 50 mbar to 1000 mbar M12 4-pin connector Options available on the IPSL pressure transmitter. Pressure range Output type Mating cable and plug assemblies are available - see datasheet M12 Cable Set Series Suitable applications The IPSL-M12 is suitable for use in a wide HVAC Mechanical engineering range of applications. The probe uses a Pneumatics Environmental engineering piezo-resistive silicon sensor giving, Rainwater harvesting Automotive testing excellent media compatibility within an oil Agricultural machinery Tank gauging filled 316L stainless steel housing Laboratory testing IBC IBC, Tote or pallet tank The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, Performance especially in high vibration/shock Accuracy (Non-Linearity & Hysteresis)<0.25% / FS (BFSL) for gauge, <0.5% for Absolute applications. Setting Errors (offsets) 2-wire Zero & Full Scale, <0.5% / FS Each device is temperature compensated, 3-wire Zero & Full Scale, <0.5% / FS calibrated and supplied with a traceable Permiss ble Loadi 2-wire R = (Supply-9min)/0.02 max serial number and calibration data. 3-wire R = 10k min Influence Effects Supply <0.005% FS / 1V Custom versions can be made for Load 0.05% FSO / k particular applications. Material Specifications Electrical Protection Housing 316L Stainless Steel Supply reverse polarity No damage/no function O ring seals Viton Electromagnetic compatibility CE Compliant Diaphragm 316L Stainless Steel Media wetted parts Housing & connection, O ring seal, Mechanical Stability diaphragm Shock 100g / 11s Miscellaneous Vibration 10g RMS (20 - 2000Hz) Current consumption 2 -wire Limits at 28mA Temperatures & Thermal Effects 3-wire Typical 6mA Media Temperature -40C to +125C Weight Approx 100g Ambient Temperature -20C to +80C Installation position Any, small zero shift when tilted through Storage temperature -40C to +125C 90 Compensated temperature range +20C to +80C 6 Operational Life > 100x 10 cycles Thermal Zero Shift (TZS) <0.04% /FS/C Insulation resistance > 50MOhms at 50Vdc Thermal Span Shift <-0.015% /C Environmental protection IP67 (when used with a similarly rated connector) Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:sales cynergy3.com www.cynergy3.com IPSL-M12 2018 ISO9001CERTIFIED 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.IPSL-M12 series Low Range Industrial Pressure Sensor with M12 4Pin Connector Pressure Ranges and Passive mV/V Outputs Nominal Pressure, Gauge, mbar 50 100 250 500 750 1000 Nominal Pressure, Absolute mbar 500 750 1000 Permissible Overpressure mbar 2 bar 2 bar 2 bar 5 bar 5 bar 5 bar Output Signals and Supply Voltages DIN 43650 Wire system Output Supply Volts Connection Pin No. 2-wire 4-20mA 9-32Vdc +ve Supply Pin 1 -ve Supply Pin 2 Ground Earth pin 3-wire 0 - 5Vdc 9-32 Vdc +ve Supply Pin 1 -ve Supply Pin 2 +ve Output Pin 3 Ground Pin 4 Earth PartNo. PressureRange Output IPSL-G0050-5M12 0-50mbarG 4-20mA IPSL-G0100-5M12 0-100mbarG 4-20mA IPSL-G0250-5M12 0-250mbarG 4-20mA IPSL-G0500-5M12 0-500mbarG 4-20mA IPSL-G0750-5M12 0-750mbarG 4-20mA IPSL-G1000-5M12 0-1000mbarG 4-20mA IPSL-G0050-6M12 0-50mbarG 0-5V3-wire IPSL-G0100-6M12 0-100mbarG 0-5V3-wire IPSL-G0250-6M12 0-250mbarG 0-5V3-wire IPSL-G0500-6M12 0-500mbarG 0-5V3-wire IPSL-G0750-6M12 0-750mbarG 0-5V3-wire IPSL-G1000-6M12 0-1000mbarG 0-5V3-wire ISO9001CERTIFIED www.cynergy3.com 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.