IPSU-C0447-5M12 Sensata

IPSU-M12 Series Industrial Pressure Sensor - Ceramic - with M12 4-Pin Connector Piezo-resistive thick film ceramic sensor Stainless steel body Accuracy <0.25% FS BFSL 0-5V or 4-20mA output Pressure ranges from -14.5 to 5800 psi M12 4-pin connector 1/4 NPT process connection The IPSU-M12 series is suitable for use in a wide range of industrial applications. The probe uses a piezo-resistive ceramic sensor giving excellent media compatibility, within a stainless steel housing The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, especially industrial applications.. Each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration data. * Mating cable and plug assemblies are available - see datasheet M12 Cable Set Series Performance Electrical Protection Accuracy (Non-Linearity & Hysteresis) <0.25% / FS (BFSL) Supply reverse polarity No damage/no function Electromagnetic compatibility CE Compliant Setting Errors (offsets) 2-wire Zero & Full Scale, <0.5% / FS 3-wire Zero & Full Scale, <0.5% / FS Mechanical Stability Material Specifications Shock 100g / 11s Housing 316L Stainless Steel Vibration 10g RMS (20 - 2000Hz) O ring seals Viton Temperatures & Thermal Effects Diaphragm Ceramic Al O 96% 23 Media Temperature -40C to +135C Media wetted parts Housing & connection, O ring seal, Ambient Temperature -20C to +80C diaphragm Storage temperature -40C to +125C Weight Approx 100g Compensated temperature range +20C to +80C Installation position Any Thermal Zero Shift (TZS) <0.04% /FS/C 6 Operational Life > 100x 10 cycles Thermal Span Shift <0.015% /C Insulation resistance > 50MOhms at 50Vdc Environmental protection IP67 (only when used with a similarly rated connector) Pressure Ranges and Passive mV/V Outputs Nominal Pressure, Gauge, psi 15 30 75 150 300 750 1500 3750 6000 Compound range psi -7.5 to 0 -7.5 to 30-15 to 75 -15 to 1235 -15 to 285 -15 to 360 Permissible Overpressure psi 30 60 150 300 600 1500 3000 6000 9750 Burst Pressure psi 60 75 180 375 750 1800 3750 7500 9750 Output Signals and Supply Voltages Wire system Output Supply Voltage Connection Pin Nos 2-wire 4-20mA 9-32Vdc +ve Supply Pin 1 -ve Supply Pin 2 Ground Earth Pin 3-wire 0-5Vdc 9-32Vdc +ve Supply Pin 1 -ve Supply Pin 2 Output Pin 3 Earth Pin 4 *Calibration data is supplied as a sticker affixed to the product packaging - do not discard Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:sales cynergy3.com ISO9001 CERTIFIED www.cynergy3.com Made in the UK IPSU-M12 2018 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.IPSU-M12 Series Industrial Pressure Sensor - Ceramic - with M12 4-Pin Connector PartNumber Range Output IPSU-GP015-5M12 0-15 psi G 4-20mA IPSU-GP015-6M12 0-15 psi G 0-5V IPSU-GP030-5M12 0-30 psi G 4-20mA IPSU-GP030-6M12 0-30 psi G 0-5V IPSU-C0446-5M12 -14.5 to+150 psi G 4-20mA IPSU-C0446-6M12 -14.5 to+150 psi G 0-5V IPSU-GP075-5M12 0-75 psi G 4-20mA IPSU-GP075-6M12 0-75 psi G 0-5V IPSU-GP100-5M12 0-100 psi G 4-20mA IPSU-GP100-6M12 0-100 psi G 0-5V IPSU-C0447-5M12 -14.5 to+350 psi G 4-20mA IPSU-C0447-6M12 -14.5 to+350 psi G 0-5V IPSU-GP150-5M12 0-150 psi G 4-20mA IPSU-GP150-6M12 0-150 psi G 0-5V IPSU-GP300-5M12 0-300 psi G 4-20mA IPSU-GP300-6M12 0-300 psi G 0-5V IPSU-GP750-5M12 0-750 psi G 4-20mA IPSU-GP750-6M12 0-750 psi G 0-5V IPSU-GP1K5-5M12 0-1500 psi SG* 4-20mA IPSU-GP1K5-6M12 0-1500 psi SG* 0-5V IPSU-GP3K6-5M12 0-3600 psi SG* 4-20mA IPSU-GP3K6-6M12 0-3600 psi SG* 0-5V IPSU-GP5K8-5M12 0-5800 psi SG* 4-20mA IPSU-GP5K8-6M12 0-5800 psi SG* 0-5V *sealedgauge Mechanical Dimensions Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:sales cynergy3.com www.cynergy3.com ISO9001 CERTIFIED 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.