M9105 SHAFT SYSTEM WITH MAGNET FOR ACW / TCW RANGE Features The M9105 series of magnet holders are designed to make mounting and alignment of the magnet to its sensor assembly easy to accomplish. They are especially well-suited for use with the following sensors: ACW absolute single-turn, TCW absolute multi-turn, For more detailed information on each of these sensors refer to their specific data sheets. DIMENSIONS M9105/KXX (ALUMINUM) KXX: Where XX is the shaft mounting diameter in mm. Standards are 06, 08, 10, 11, and 14 mm. i.e M9105/K10 mounts to a 10 mm shaft. Female Magnet Support + Magnet 8810/013 Ordering reference: M9105/Kxx Y A W SECTION A-A A M9105/K06 M9105/K08 M9105/K10 M9105/K11 M9105/K14 6 H7 8 H7 10 H7 11 H7 14 H7 W 20 20 26 26 29 X 12,5 12,5 14 14 14 Y 15 15 15 15 18 Z Page 1 www.sensata.com Copyright 2019 Sensata Technologies, Inc. 0 V -0,5 Z X H7 10 12,5 Index 3 H10 Magnet 2x CHc M4x12 Screws 12 25 50% of output signal visual mark 20 100.10 2.500.10 Page 2 www.sensata.com Copyright 2019 Sensata Technologies, Inc. 26 10 g7 36 h7