MCX380D5 Sensata

PCB Mount DataSheet MCX Series SIP SSR Ratings of 5 A 660 VAC SCR output for heavy industrial loads AC or DC control Zero-crossing (resistive loads) or random-fire (inductive loads) output Plastic encapsulated PRODUCT SELECTION Control Voltage 5 A 5 A 5 A 3-15 VDC MCX240D5 MCX480D5 4-15 VDC MCX380D5 15-32 VDC MCXE380D5 MCXE480D5 MCXE240D5 18-36 VAC MCXE240A5 90-140 VAC MCX240A5 AVAILABLE OPTIONS Control Voltage Blank: 3-15 VDC (240 and D suffix only) 4-15 VDC (380/480 and D suffix only) 90-140 VAC (A suffix only) Control Input Type Switching Mode E: 15-32 VDC (D suffix only) D: DC Input Blank: Zero Voltage Turn-On 18-36 VAC (A suffix only) Series A: AC Input R: Random Turn-on MCX E 240 D 5 R Operating Voltage Operating Rating 240: 12-280 VAC 5: 5 Amps 380: 48-530 VAC Required for valid part number 480: 48-660 VAC For options only and not required for valid part number OUTPUT SPECIFICATIONS (1) Description 240VAC 380VAC 480VAC Operating Voltage (47-63Hz) Vrms 12-280 48-530 48-660 Transient Overvoltage Vpk 600 1200 1200 Maximum Off-State Leakage Current Rated Voltage mA 0.1 0.1 0.1 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (2) 500 500 500 Maximum Load Current Arms (3) 5 5 5 Minimum Load Current Arms 0.06 0.06 0.06 Maximum Surge Current (16.6msec) Apk 250 250 250 Maximum On-State Voltage Drop Rated Current Vpk 1.4 1.4 1.4 Maximum I t for Fusing (8.3msec) A sec 260 260 260 Minimum Power Factor (at Maximum load) 0.5 0.5 0.25/0.18 FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.LOAD LOAD LOAD LOAD PCB Mount DataSheet INPUT SPECIFICATIONS (1) Description MCX240Dx MCX380Dx MCXExxxDx MCX240A5 MCXE240A5 Nominal Voltage 5 VDC 5 VDC 24 VDC 120 VAC 24 VAC Control Voltage Range 3-15 VDC 4-15 VDC 15-32 VDC 90-140 VAC 18-36 VAC Maximum Turn On Voltage 3.0 VDC 4.0 VDC 15.0 VDC 90.0 Vrms 18.0 Vrms Mimimum Turn-Off Voltage 1.0 VDC 1.0 VDC 1.0 VDC 10.0 Vrms 2.0 Vrms Input Current Nominal Voltage 15 mAdc 15 mAdc 15 mAdc 10 mArms 10 mArms Nominal Input Impedance 300 Ohm 240 Ohm 1500 Ohm 14.1K Ohm 2.1K Ohm Maximum Turn-On Time msec (3) 1/2 Cycle 1/2 Cycle 1/2 Cycle 10 10 Maximum Turn-Off Time msec 1/2 Cycle 1/2 Cycle 1/2 Cycle 40 40 (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -20 to 80 C Ambient Storage Temperature Range -20 to 125 C Weight (typical) 0.7 oz (20g) Encapsulation Thermally Conductive Epoxy Terminal nish Sulfamate Nickel Plated Meets the requirements of solderability per IEC60068-2-20, section 4, method 2 GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 (3) Turn-On time for random turn-on versions is 0.01 msec (DC control Models). (4) Terminals are not suitable for bending or forming process. WIRING DIAGRAM TRIGGER TRIGGER CIRCUIT CIRCUIT AC/DC Converter 3 2 1 4 3 V2 1 4 -DC +DC AC AC B A B A AC AC AC AC Load can be wired in location A or B Load can be wired in location A or B Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.