MP1C-3 Sensata

MP1C Series This float switch is designed specially to maintain the air cushion in autoclaves and is available in two different versions 1 or 11/4.diameter. Thanks to its small diameter it can be introduced into the tank through a coupling and mounted either horizontally or vertically (with counterweight).The level switch action point is determined by the cable length with the entry point (if horizontal) or to the application point (if vertical).When the tank water level rises , the switch gives the starting up command to the compressor contactor or to the compressed air valve, which then stops the pump with an auxiliary contact. When the water / air level stabilises at the desired position, the switch stops the compressor and starts the pump. Technical Specifications MP1C-3 MP1C-5 Contact Form C/O Material High Density Polyethylene Temp Range C 0 / +55 F + 32 / +131 Cable 3 metre 5 metre Standard cable covering PVC 3x1 A05 VVF Rf60 For compressor Max. working pressure 10 bar receivers or pressurised Electrical Specifications tanks Power Rating Max 3VA Switching Voltage Max 60Vac Installation through Switching Current Max. Resistive 0.25 A G1or G11/4 Supplied with gland & It is necessary to use an auxiliary relay, when switching any significant load. counterweight Mount through side or top of tank Cynergy3 Components Ltd Off - On 7 Cobham Road Differential 5 Ferndown Industrial Estate Wimborne On - Off Dorset BH21 7PE Tel: +44 (0) 1202 897969 Minimum Cable Pivot sales cynergy3.com length 120mm ISO9001 CERTIFIED www.cynergy3.com MP1C 2018 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.ISO9001 CERTIFIED www.cynergy3.com 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.