Data Sheet P1E Oxigen Service Pressure Sensor Main Features Pressure Ranges 10 bar up to 400 bar (gage)* Electrical Connection M12 - 4 Pole, 18mm connector, 9.4mm connector* Pressure Connection G1/4A DIN 3852-A* Housing Material 304 Stainless Steel (1.4301) Output Signal 4 - 20 mA* * for more options see How to Order Attributes Typical Applications Hermetically Sealed Compact & Light-weight Medical Air Plant Sector Cleanliness in Accordance with ISO 15001 Medical Gas Control Systems. Wetted Parts Free of Oil and Greas Medical Gas Control Manifolds. Resistant to Chemical Attack Medical Gas Storage. Superior Long-Term Stability & Repeatability Delivery systems No Internal Seal Nitrogen and Oxygen Plants Description Specially designed for oxygen service, supply and transport applications Kavlicos P1E pressure sensor apply ISO15001 cleaning procedures and are delivered with a protection cap on the thread in an individual hermetically sealed packaging. P1E sensors are approved to be used in medical gas service applications such as breathing oxygen and high pressure oxygen service and distribution applications. The sensor offers a compact, low weight and a hermetically sealed design that incorporates Kavlicos thin film strain gauge technology in a 304 stainless steel housing. Due to the hermetically sealed design the sense element is impervious to almost any media, and does not require an internal seal. The robust design ensures high repeatability and long term stability. P1E sensors are designed for a wide range of liquid and gaseous media and a wide temperature range from -30 C to +100C (media to 120C). To ensure a world-wide usage the senor is cULus listed and CE certified. www.kavlico.comTechnical Specifications Pressure Ranges 10 16 25 100 250 400 from 0 to bar (gage) Proof pressure bar (gage) 20 32 50 200 375 600 100 160 200 600 1000 1600 Burst pressure bar (gage) Physical Operating Life Cycle min. 10 million full pressure cycles over the full range Vibration Resistance IEC 60068-2-64 (RANDOM) 20 PSD Shock Resistance 25 g minimum according to DIN EN 60068-2-27 Drop Test 1 meter drop on concrete as per SAE J1455 / DIN EN 60068-2-3-1 Weight Approx. 50 grams (without mating connector) Ingress Protection IP 65 or IP67 - depending on electrical connector Medium Temperature -30C to + 120C Environmental Temperature -30C to + 100C Storage Temperature -30C to + 100C Media All class II fluids and gases compatible with stainless steel 304 (1.4301) Performance *1 *3 Accuracy 0.5 % of span *2 *3 Non-linearity 0.2 % of span Non-repeatability 0.1 % of span 1-year stability 0.2 % of span Temp. Coefficients - Zero 0.2 % of span / 10 K within temperature range 0C to + 80C Temp. Coefficients - Span 0.2 % of span / 10 K within temperature range 0C to + 80C *1 Including non-linearity, hysteresis, non-repeatability, zero point and full scale error (corresponds to error of measurement per IEC 61298-2). Adjusted in vertical mounting position with pressure port down. *2 BFSL according to IEC 61298-2 reference conditions to EN 61298-1 *3 Others on request www.kavlico.com Data Sheet P1E 2