P4000 Pressure Sensor Introduction The P4000 series of pressure sensors incorporates a stainless steel isolation diaphragm and welded construction to withstand harsh environments. The sensor uses piezo-resistive sensing technology and is paired with our custom ASIC to produce a stable, accurate output. Using a 5 Vdc input, the sensors provide a 0.5 to 4.5 Vdc output proportional to pressure. Internal temperature compensation provides an accurate, easy-to-use device. The rugged construction of the P4000 series is specifically designed to withstand high overpressure spikes and provide compatibility with a wide range of process media including refrigerants and hydraulic oils. Features Welded Stainless Steel Construction Isolation Diaphragm Absolute or Sealed Gage Reference Low Power Consumption High Vibration Tolerance Outstanding EMI/RFI Protection Amplified Linear Output Temperature Compensated Aplications On & Off-Highway Vehicle Hydraulic Systems Pressurized Tools Instruments Pneumatic Controls Refrigerant Control & Recovery MAIN FEATURES 0 to 100 up to 0 to 5000 PSI Pressure Ranges Packard Electric Metri-Pack 150 Series, Deutsch Electrical Connection 1/8 27 NPT, 7/16 20 UNF for more options see how to order section Pressure Connection 304 Stainless Steel (1.4301) Housing Material 0.5 - 4.5 VDC Output Signal Page 1 www.sensata.com Copyright 2018 Sensata Technologies, Inc. TECHNICAL SPECIFICATIONS Pressure Ranges PSI (1) 100 200 300 500 750 1000 1500 2000 3000 4000 5000 From 0 to (gage) PSI 300 900 900 150 1500 3000 5000 5000 8000 8000 8000 Proof pressure (gage) PSI 3750 3750 3750 3750 3750 15000 15000 15000 15000 15000 15000 Burst pressure (gage) Physical Operating Life Cycle min. 1 million full pressure cycles over the full range Vibration Resistance MIL-STD 202, Method 204, Condition A (10 Gs sinusoidal) Shock Resistance 75 Gs sine wave Drop Test 1m onto concrete surface Weight 80 grams (without mating connector) Ingress Protection IP67 Media Temperature -40C to + 150C Environmental Temperature - 40C to + 125 C - 40C to + 125 C Storage Temperature All fluids compatible with stainless steel 304 (1.4301) Media Performance (2) Total error band +/-2% of span (-40 T 125 C) Electrical Output Signal 0.54.5 VDC ratiometric Operating Supply Signal 5.0 0.5 VDC 10% Power Consumption <16 mW Excitation Current < 3 mA 16 VDC Overvoltage Protection (3) Yes Short-circuit Proofness (4) Yes Reverse Polarity Protection 25 k Output Load 10 ms max. to 63% of full scale pressure with step change on input Response Time GENERAL NOTES (1) For more options see Ordering Options (2) Including accuracy, calibration, temperature, non-linearity, hysteresis, non-repeatability, error (3) For min. 3 intervals at 5 minutes each (4) For min. 10 seconds on assigned pins Page 2 www.sensata.com Copyright 2018 Sensata Technologies, Inc.