PFE480D25 Sensata

PCB Mount DataSheet PF Series SIP SSR Ratings to 25A (forced air) 480 VAC SCR output for heavy industrial loads AC or DC control Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 25 A 25 A 25 A 3-15 VDC PF240D25 4-15 VDC PF380D25 PF480D25 15-32 VDC PFE240D25 PFE380D25 PFE480D25 18-36 VAC PFE240A25 90-140 VAC PF240A25 AVAILABLE OPTIONS Operational Voltage Output Type 240: 12-280 VAC Blank: Normally Open Operational Current 380: 48-530 VAC 25: 25 Amps -B: Normally Closed Series 480: 48-660 VAC (PF480D25 only) E PF 240 D 25 R -B Control Voltage Switching Mode Control Input Type Blank: 3-15 VDC Blank: Zero Voltge Turn-On D: DC Input (240,D suffix only) R: Random Turn-On A: AC Input 4-15 VDC (380/480,D suffix only) 90-140 VAC (A suffix only) E: 15-32 VDC (D suffix only) 18-36 VAC (A suffix only) Required for valid part number For options only and not required for valid part number (1) OUTPUT SPECIFICATIONS Description PF240 PF380 PF480 Operating Voltage (47-63Hz) Vrms 12-280 48-530 48-660 Transient Overvoltage Vpk 600 1200 1200 Maximum Off-State Leakage Current Rated Voltage mArms 0.1 0.1 0.1 500 500 500 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (2) Maximum Load Current (Convection Air) Arms (3) 10 10 10 25 25 25 Maximum Load Current (Forced Air) Arms (3) 0.06 0.06 0.06 Minimum Load Current Arms Maximum Surge Current (16.6ms) Apk 250 250 250 Maximum On-State Voltage Drop Rated Current Vpk 1.6 1.6 1.6 Maximum It for fusing (8.3 msec) A sec 260 260 260 0.5 0.5 0.5 Minimum Power Factor (with Maximum Load) FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2021 Crydom Inc. Specifications subject to change without notice.LOAD LOAD LOAD LOAD PCB Mount DataSheet (1) INPUT SPECIFICATIONS Description PFExxxD25 PF240A25 PFE240A25 PF240D25 PF380D/480D Control Voltage Range VDC 3-15 VDC 4-15 VDC 15-32 VDC 90-140 VAC 18-36 VAC Maximum Turn On Voltage 15.0 VDC 90.0 Vrms 18.0 Vrms 3.0 VDC 4.0 VDC Minimum Turn-Off Voltage 1.0 VDC 10.0 Vrms 2.0 Vrms 1.0 VDC 1.0 VDC Typical Input Current Nominal Voltage 15 mAdc 10 mAdc 10 mAdc 15 mAdc 15 mAdc 2.1 k Ohm Nominal Input Impedance 300 Ohm 240 Ohm 1500 Ohm 14.1 k Ohm 1/2 Cycle 10 10 Maximum Turn-On Time msec (4) 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle 1/2 Cycle 1/2 Cycle 40 40 GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 V DC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -30C to 80C Ambient Storage Temperature Range -30C to 125C Weight (typical) 1.02 oz. (29g) Encapsulation Thermally Conductive Epoxy Meets the requirements of solderability per IEC60068-2-20 GENERAL NOTES 1) All parameters at 25C unless otherwise specied. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Heatsink temperature 85C Maximum for 25A forced air cooling. 4) Turn-On Time for Random Turn-On versions 0.1 msec (DC Control Models) 5) Terminals are not suitable for bending or forming process. WIRING DIAGRAM TRIGGER TRIGGER CIRCUIT CIRCUIT AC/DC Converter 4 3 2 1 3 V2 1 4 -DC +DC AC AC B B A A AC AC AC AC Load can be wired in location A or B Load can be wired in location A or B Do not forget to visit us at: www.crydom.com Copyright 2021 Crydom Inc. Specifications subject to change without notice.