PM2260D50V Sensata

Panel Mount Datasheet PM22 Series Panel Mount SSRs Output ratings up to 95 Amps at 600VAC Built-in overvoltage protection DBC substrate for superior thermal performance LED input status indicator IP20 touch-safe housing AC or DC control 4000 VAC optical isolation C-UL-US and TUV approved PRODUCT SELECTION Control Voltage 25A 50A 95A 90-280 VAC/VDC PM2260A25V PM2260A50V PM2260A95V 4-32 VDC PM2260D25V PM2260D50V PM2260D95V AVAILABLE OPTIONS Switching Type Blank: Zero Voltage Rated Load Current Turn-On Thermal Pad 25: 25 Amps R: Instantaneous Turn-On 50: 50 Amps Blank: Not Included Operating Voltage Series 2 (Motor Rating Certified) H: Included 60: 48-600 VAC 95: 95 Amps High I t PM22 60 A 25 UV R J HU Control Voltage (1) Terminal Layout Input Connector A: 90-280 VAC/VDC V: Contactor Configuration Blank: Screw Terminal Required for valid part number For options only and not required for valid part number D: 4-32 VDC J: Spring Terminal (2) OUTPUT SPECIFICATIONS Description 25A 50A 95A 48-600 48-600 Operating Voltage (47-440Hz) VRMS 48-600 Transient Overvoltage Vpk (3) 1200 1200 1200 Maximum Off-State Leakage Current Rated Voltage mARMS 1 1 1 Minimum Off-State dV/dt Maximum Rated Voltage V/sec 500 500 500 Load Current, General Use UL508/LC A IEC 62314 40C ARMS (4) 25 50 95 Load Current, Motor Starting UL508 FLA/LC B IEC 62314 40C ARMS (4) 8.5/4.8 14/7.6 26/14 Minimum Load Current mARMS 100 100 150 Maximum 1 Cycle Surge Current (50/60Hz) Apk 286/300 716/750 1290/1350 Maximum On-State Voltage Drop Rated Current Vpk 1.35 1.35 1.30 Thermal Resistance Juntion to Case (Rjc) C/W 0.49 0.27 0.2 Maximum 1/2 Cycle I t for Fusing (50/60Hz) A sec 409/375 2563/2343 8320/7593 Minimum Heat Sink for Rated Current 40C C/W 2 0.7 0.25 Minimum Power Factor (at Maximum Load) (5) 0.5 0.5 0.5 Motor Rating UL 508/IEC62314 HP (kW) : 120 VAC 0.5 (0.37) 1 (0.74) 2 (1.5) Motor Rating UL 508/IEC62314 HP (kW) : 240 VAC 1.5 (1.1) 3 (2.2) 5 (3.73) Motor Rating UL 508/IEC62314 HP (kW) : 480 VAC 3 (2.24) 5 (3.7) 10 (7.4) (2) INPUT SPECIFICATIONS Description PM2260DxxV PM2260AxxV Control Voltage Range 4-32 VDC (6) 90-280 VAC/VDC (7) Maximum Reverse Voltage -32 VDC - Minimum Turn-On Voltage 4 VDC 90 VAC/VDC Must Turn-Off Voltage 1 VDC 5 VAC/VDC Minimum Input Current (for on-state) 7 mA 6 mA Maximum Input Current 15 mA 10 mA Nominal Input Impedance Current Limited Current Limited Maximum Turn-On Time msec 1/2 Cycle (8) 20 Maximum Turn-Off Time msec 1/2 Cycle 30 Do not forget to visit us at: www.crydom.com Copyright 2019 Crydom Inc. Specifications subject to change without notice.Panel Mount Datasheet (2) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input to Output (50/60Hz) 4000 VRMS Dielectric Strength, Input/Output to Baseplate (50/60Hz) 4000 VRMS 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range (9) -40 to 80 C Ambient Storage Temperature Range -40 to 100 C Short Circuit Current Rating (10) 100kA Weight (typical) 2.3 oz (65 g) Housing Material UL94 V-0 Baseplate Material Aluminum Hardware Finish Nickel Plating (11) Input Terminal Screw Torque Range (in-lb/Nm) 5/0.5 Load Terminal Screw Torque Range (in-lb/Nm) 18-20/2-2.2 SSR Mounting Screw Torque Range (in-lb/Nm) 20-25/2.2-2.8 Humidity 95% non-condensing LED Input Status Indicator Green INPUT CURRENT INFORMATION 4-32 VDC Input 90-280 VAC/VDC Input 14 7 12 6 10 5 8 4 6 3 4 2 2 1 0 0 0 5 10 15 20 25 30 35 0 40 80 120 160 200 240 280 Input Voltage (VDC) Input Voltage (VAC/VDC) SURGE CURRENT INFORMATION PM2260x25V PM2260x50V 300 700 600 250 500 200 400 150 300 100 200 50 100 0 0 0.01 0.1 1 10 0.01 0.1 1 10 PM2260x95V 1400 1200 1000 Single Pulse (12) 800 600 400 200 0 0.01 0.1 1 10 Do not forget to visit us at: www.crydom.com Copyright 2019 Crydom Inc. Specifications subject to change without notice. Surge Duration (sec) Surge Duration (sec) Surge Duration (sec) Surge Current (Amp) AC Peak Surge Current (Amp) AC Peak Input Current (mA) Input Current (mA) Surge Current (Amp) AC Peak