S3010A Sensata

Series 3 Output rated at 3A 20-280 VAC DC control Zero-crossing (resistive loads) output Compact design ideal for replacing electromechanical relays PRODUCT SELECTION Control Voltage 120 VAC 240 VAC 3.5-8 VDC S312 S322 3.5-8 VDC S3012A S3022A OUTPUT SPECIFICATIONS (1) Description S312 S3012A S322 S3022A Operating Voltage (47-63Hz) Vrms 20-140 20-140 40-280 40-280 Transient Overvoltage Vpk 600 600 600 600 Maximum Off-State Leakage Current Rated Voltage mArms 1 4 1 4 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (3) 200 201 200 200 Maximum Load Current Arms 3 3 3 3 Minimum Load Current Arms 0.15 0.15 0.15 0.15 Maximum Surge Current (16.6ms) Apk 55 55 55 55 Maximum On-State Voltage Drop Rated Current Vpk 1.5 1.5 1.5 1.5 Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 0.5 INPUT SPECIFICATIONS (1) Description Control Voltage Range 3.5-8 VDC Maximum Turn-On Voltage 3.5 VDC Minimum Turn-Off Voltage 1.0 VDC Nominal Input Impedance 200 Ohm Typical Input Current 5 VDC 20 mA Maximum Turn-On Time msec 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz)(2) 4000 Vrms 9 Minimum Insulation Resistance ( 500 V DC)(2) 10 Ohm Maximum Capacitance, Input/Output 8.0 pF Ambient Operating Temperature Range -30 to 80C Ambient Storage Temperature Range -30 to 125 C Weight (typical) 0.6 oz (0.8g) Encapsulation Thermally conductive Epoxy GENERAL NOTES GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) Dielectric and insulation resistance are measured between input and output 3) Off-State dv/dt test method per EIA/NARM standard RS-443, MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS UL E116949 CSA LR81689 VDE 10114 UG Rev. 120210