UPD2415F-10 Sensata

PCB Mount DataSheet PANEL MOUNT PCB MOUNT UPD24 Series SIP SSR Single Channel Ratings of 15A and 25A 280 VAC PCB Mount Package or Panel Mount quick connect terminals (F option) SCR output for heavy industrial loads Zero-crossing (resistive loads) or random-fire (inductive loads) output Low Leakage (snubberless) output PRODUCT SELECTION Control Voltage 15 A 15 A 25 A 25 A UPD2415 UPD2415 UPD2425 UPD2425-10 3-32 VDC AVAILABLE OPTIONS Operational Current Switching Mode 15: 15 Amps Blank: Zero Voltge Turn-On 25: 25 Amps -10: Random Turn-On Series 24 15 F -10 UPD Terminals Type Operational Voltage Blank: Pins for PCB Mount 24: 24-280 VAC F: Quick Connect Terminals Required for valid part number For options only and not required for valid part number (1) OUTPUT SPECIFICATIONS Description UPD2415 UPD2415-10 UPD2425 UPD2425-10 Operating Voltage (47-440Hz) Vrms 24-280 24-280 24-280 24-280 Maximum Load Current Arms (3) 15 15 25 25 Transient Overvoltage Vpk 600 600 600 600 Maximum 1 Cycle Surge Current (50/60Hz) Apk 115/120 115/120 239/250 239/250 1.4 1.4 1.4 1.4 Maximum On-State Voltage Drop Rated Current Vpk 1.2 1.2 0.7 0.7 Thermal Resistance Junction to Case C/W Maximum I t for fusing (50/60Hz, 1/2 cycle) A sec 66/60 66/60 285/259 285/259 Maximum Off-State Leakage Current Rated Voltage mArms 0.1 0.1 0.1 0.1 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (2) 500 500 500 500 Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 0.5 (1) INPUT SPECIFICATIONS Description UPD2415 UPD2415-10 UPD2425 UPD2425-10 3-32 VDC 3-32 VDC 3-32 VDC 3-32 VDC Control Voltage Range VDC Maximum Turn On Voltage 3.0 VDC 3.0 VDC 3.0 VDC 3.0 VDCT Minimum Turn-Off Voltage 1.0 VDC 1.0 VDC 1.0 VDC 1.0 VDC 10 mAdc 10 mAdc 10 mAdc 10 mAdc Typical Input Current 12 VDC See note 4 See note 4 See note 4 See note 4 Nominal Input Impedance Maximum Turn-On Time msec 1/2 Cycle 0.02 1/2 Cycle 0.02 1/2 Cycle 1/2 Cycle 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time msec FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.PCB Mount DataSheet GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output (50/60Hz) 2500 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohms Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -40C to 80C Ambient Storage Temperature Range -40C to 125C Weight (typical) 1.5 oz. (42.5g) GENERAL NOTES 1) All parameters at 25C unless otherwise specied. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Heat sinking required, see following pages for derating curves. 4) Input circuit incorporates active current limiter. WIRING DIAGRAM CURRENT LOAD AC AC LIMITER + +DC A B AC LOAD AC LOAD CAN BE WIRED IN LOCATION A OR B - -DC THERMAL DERATE INFORMATION 1.5 C/W 2 C/W 2 C/W 3 C/W 3 C/W 5 C/W 5 C/W DERATING CURVE: UPD2415 DERATING CURVE: UPD2425 7 C/W 7 C/W 15 12.5 25 10 20 7.5 15 5 10 2.5 5 0 0 20 25 30 40 45 50 55 60 65 70 75 80 20 30 50 60 70 80 35 40 AMBIENT TEMPERATURE (C) AMBIENT TEMPERATURE (C) Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice. LOAD CURRENT (AMPS) LOAD CURRENT (AMPS)