3.000.119 Sensirion

Datasheet SPS30 Particulate Matter Sensor for Air Quality Monitoring and Control Unique long-term stability Advanced particle size binning Superior accuracy in mass-concentration sensing Small, ultra-slim package Fully calibrated digital output Product Summary The SPS30 Particulate Matter (PM) sensor is a technological breakthrough in optical PM sensors. Its measurement principle is based on laser scattering and makes use of Sensirions innovative contamination- resistance technology. This technology, together with high-quality and long-lasting components, enables accurate measurements from its first operation and throughout its lifetime of more than eight years. In addition, Sensirions advanced algorithms provide superior accuracy for different PM types and higher-resolution particle size binning, opening up new possibilities for the detection of different sorts of environmental dust and other 3 particles. With dimensions of only 41 x 41 x 12 mm , it is also the perfect solution for applications where size is of paramount importance, such as wall-mounted or compact air quality devices. Content 1 Particulate Matter Sensor Specifications 2 2 Electrical Specifications 3 3 Hardware Interface Specifications 4 4 Operation and Communication through the UART Interface 5 2 5 Operation and Communication through the I C Interface 11 6 Technical Drawings 17 7 Shipping Package 18 8 Ordering Information 18 9 Important Notices 19 10 Headquarters and Subsidiaries 20 www.sensirion.com Preliminary Version 0.9 D1 November 2018 1/20 1 Particulate Matter Sensor Specifications Default conditions of 25 C and 5 V supply voltage apply to values in the table below, unless otherwise stated. Parameter Conditions Value Units 1 3 3 Mass concentration accuracy 0 to 100 g/m g/m 10 3 100 to 1000 g/m % 10 3 Mass concentration range - 0 to 1000 g/m 3 Mass concentration resolution - 1 g/m 2 Mass concentration size range PM1.0 0.3 to 1.0 m PM2.5 0.3 to 2.5 m PM4 0.3 to 4.0 m PM10 0.3 to 10.0 m 3 Number concentration range - 0 to 3000 1/cm 2 Number concentration size range PM0.5 0.3 to 0.5 m PM1.0 0.3 to 1.0 m PM2.5 0.3 to 2.5 m PM4 0.3 to 4.0 m PM10 0.3 to 10.0 m Sampling interval - 1 s Start-up time - < 8 s 3 Lifetime 24 h/day operation > 8 years Acoustic emission level 0.2 m 25 dB(A) Weight - 26 g Table 1: Particulate Matter sensor specifications. M.C. M.C. 3 g/m % 50 50 45 45 Typical Consistency Typical Consistency 40 40 35 35 30 30 25 25 20 20 15 15 10 10 5 5 0 0 -10 0 10 20 30 40 50 60 -10 0 10 20 30 40 50 60 Temperature C Temperature C 3 Figure 1: Typical consistency tolerance for PM2.5 in g/m Figure 2: Typical consistency tolerance for PM2.5 in % 3 3 between 0-100 g/m . between 100-1000 g/m . 1 Deviation to TSI DustTrak DRX Aerosol Monitor 8533 reference. PM2.5 accuracy is verified for every sensor after calibration using a defined potassium chloride particle distribution. Ask Sensirion for further details on accuracy characterization procedures. 2 PMx defines particles with a size smaller than x micrometers (e.g., PM2.5 = particles smaller than 2.5 m). 3 Validated with accelerated aging tests. Ask Sensirion for further details on accelerated aging validation procedures. Lifetime might vary depending on different operating conditions. www.sensirion.com Preliminary Version 0.9 D1 November 2018 2/20