GP1A57HRJ00F Sharp

GP1A57HRJ00F Gap : 10mm, Slit : 1.8mm GP1A57HRJ00F *OPIC Output Case package Transmissive Photointerrupter Description Agency approvals/Compliance GP1A57HRJ00F is a standard, OPIC output, trans- 1. Compliant with RoHS directive missive photointerrupter with opposing emitter and de- tector in a case, providing non-contact sensing. For this Applications family of devices, the emitter and detector are inserted in 1. General purpose detection of object presence or mo- a case, resulting in a through-hole design. tion. This device has a wide gap. 2. Example : Printer, FAX, Optical storage unit Features 1. Transmissive with OPIC output 2. Highlights : Vertical Slit for alternate motion detection Output Low Level at intercepting optical path Wide gap width (10mm) Positioning Pin to prevent misalignment 3. Key Parameters : Gap Width : 10mm Slit Width (detector side) : 1.8mm Package : 18.615.25mm 4. RoHS directive compliant *OPI(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal- processing Notice The content of data sheet is subject to change without prior notice. In the absence of con rmation by device speci cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device speci cation sheets before using any SHARP device. Sheet No.: D3-A03901FEN 1 Date Oct. 3. 2005 SHARP CorporationGP1A57HR 1.5 GP1A57HRJ00F Internal Connection Diagram Top view Voltage regulator Amp. 3 2 1 Anode (15k) 4 2 Cathode 3 V CC 4 V O 5 GND 5 1 (Unit : mm) Outline Dimensions Slit width (Detector side) 18.6 0.1 1.8 C1 10 50.4 Date code C0.3 50.45 (1.5) (2.54) 0.7 (15.2) 8.95 5 1 3 4 2 Tolerance : 0.2mm ( ) : Reference dimensions Product mass : approx. 0.7g Dip soldering material : Sn 3Ag0.5Cu Sheet No.: D3-A03901FEN 2 0.7 C0.2 Detector center 5 0.7 2 (2.5) 1.5 3 15.2 MIN. 4